|
|
IMC-P101-M-SC - Industrial PoE Media Converter, multi mode, SC connector by MOXA
|
|
|
- 10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X
- IEEE 802.3af-compliant PoE PSE equipment
- Power failure alarm by relay output
- Supports store-and-forward mode and pass-through mode
- Redundant dual DC power inputs
|
|
|
IMC-P101-M-SC Ethernet-to-fiber media converters provide Ethernet media conversion from 10/100BaseT(X) to 100BaseFX (with SC or ST connectors). These converters are classified as power source equipment (PSE), and when used in this way, they provide up to 15.4 watts to IEEE 802.3af-compliant powered devices (PDs), eliminating the need for additional wiring. The IMC-P101 converters support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, and MDI/MDI-X auto-sensing, providing a complete solution for your industrial Ethernet network.
Ethernet Interface
-
100BaseFX Ports (multi-mode SC connector)
IMC-P101-M-SC Series: 1
-
Optical Fiber
-
Magnetic Isolation Protection
1.5 kV (built-in)
-
PoE Ports (10/100BaseT(X), RJ45 connector)
1
Power Parameters
-
Input Current
430 mA @ 46 to 57 VDC
-
Input Voltage
46 to 57 VDC
-
Overload Current Protection
Supported
-
Power Consumption
430 mA @ 46 to 57 VDC
Physical Characteristics
Environmental Limits
-
Operating Temperature
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
-
Storage Temperature (package included)
-40 to 85°C (-40 to 185°F)
-
Ambient Relative Humidity
5 to 95% (non-condensing)
Standards and Certifications
-
EMC
EN 55032/24
-
EMI
CISPR 32, FCC Part 15B Class A
-
EMS
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m
IEC 61000-4-8 PFMF
IEC 61000-4-11
-
Environmental Testing
IEC 60068-2-2
IEC 60068-2-3
-
Safety
EN 60950-1, UL 60950-1
-
Vibration
IEC 60068-2-6
MTBF
-
Time
435,210 hrs
-
Standards
Telcordia (Bellcore), GB
|
|