ADAM-4571-CE
The ADAM-6015 7-channel RTD input module accepts a wide range of RTD sensor types, including Pt100, Pt1000, Ni50, Ni508, and Balco 500 series. Multi input ranges are allowed in one module, creating a cost-effective solution. Most important, the ADAM-6015 supports open wiring diagnostic function which warns operators when the sensor wire has been broken. It specifically aims at building and factory temperature monitoring applications.
Ethernet Communications
- Compatibility: IEEE 802.3, IEEE 802.3u
- Speed: 10/100 Mbps
- No. of Ports; 1
- Port Connector: 8-pin RJ-45
- Protection: Built-in 1.5 KV magnetic isolation
Serial Communications
- Port Type: ADAM-4571/4570: RS-232/422/485, software selectable ADAM-4571L/4570L: RS-232
- No. of Ports: ADAM-4571/4571L: 1 ADAM-4570/4570L: 2
- Port Connector: ADAM-4571/4571L: DB9 male ADAM-4570/4570L: 10-pin RJ48
- Data Bits: 5, 6, 7, 8
- Stop Bits: 1, 1.5, 2
- Parity: None, Odd, Even, Space, Mark
- Flow Control: XON/XOFF, RST/CTS, DTR/DSR
- Baud Rate: 50 bps ~ 921.6 kbps, any baud rate setting
- Serial Signals: RS-232: TxD, RxD, CTS, RTS, DTR, DSR, DCD, RI, GND RS-422: TxD+, TxD-, RxD+, RxD-, GND RS-485: Data+, Data-, GND
- Protection: 15 KV ESD protection for all signals
Software
- Driver Support: 32-bit/64-bit Windows 2000/XP/Vista/7, Windows Server 2003/2008, Windows CE 5.0, and Linux
- Utility Software: Advantech Serial Device Server Configuration Utility
- Operation Modes: COM port redirection (Virtual COM) TCP/UDP server (polling) mode TCP/UDP client (event handling) mode Pair Connection (peer to peer) mode
- Configuration: Windows utility, Telnet console, Web Browser
- Protocol: ICMP, IP, TCP, UDP, BOOTP, DHCP, Auto IP, Telnet, SNMP, HTTP, DNS, SMTP, AR
Mechanics
- Dimension (H x W x D): 70 x 130 x 30 mm
- Enclosure: ABS+PC with solid mounting hardware
- Mountion: DIN-rail, stack, wall
- Weight: ADAM-4571/4571L: 135g ADAM-4570/4570L: 160g
General
- LED Indicators: System: Power, System Status LAN: Speed, Link/Active Serial: Tx, Rx
- Reboot Trigger: Built-in WDT (watchdog timer)
Power Requirements
- Power Input 10 ~ 30 VDC
- Power Connector Terminal block
- Power Consumption ADAM-4571/4571L: 1.5 W ADAM-4570/4570L: 2 W
Environment
- Operating Temperature: -10 ~ 60° C (14 ~ 140° F)
- Storage Temperature: -20 ~ 80° C (-4 ~ 176° F)
- Operating Humidity: 5 to 95% RH
Regulatory Approvals
- EMC: CE, FCC Part 15 Subpart B (Class A)
|