7 Channel Digital Input and 8 Channel Digital Output Data Acquisition Module
with Display, communicable over Modbus RTU and RS-485, supports operating
temperatures from -25 to 75°C
The M-7000 series is a family of network data acquisition and control modules
that support Modbus RTU. They can be remotely controlled using a set of commands
called DCON protocol. With the Modbus RTU protocol, it can easily communicate
with most popular SCADA/ HMI software and PLCs.
Communication Interface: RS-485
Digital Input Channels: 7 (Sink)
D/I can be used as counter
Digital Output Channels: 8 (NPN, Sink)
Din Rail Mount
Digital Input
Channels
7
Input Type
Source, non-isolated channel with common ground
Off Voltage Level
+1V max.
On Voltage Level
+4V ~ +30V
Input Impedance
3K9, 0.3W
Counters
channels : 7
Max. Counts: 16-bit (65535)
Max. Input Frequency : 100Hz
Min. Pulse Width : 5ms
Digital Output
Channels
8, Sink, NPN
Output Voltage
30V max.
Output Current
30mA max.
Interface
Interface
RS-485
Format
N, 8, 1
Baud Rate
1200 ~ 115200bps
LED Display
1 LED as Power/ Communication indicator
7 LEDs as Digital Input indicators, and 8 LEDs as Digital Output
indicators