|
|
M-7028D - 8-channel Analog Output Module. 12-bit Analog Output. Wide Operating Temperature Range: -25 to +75C. Modbus RTU by ICP DAS
|
|
|
M-7028D_SUMMARY.html
- 8-channel Analog Output
- Source Type Current Output
- 12-bit Analog Output
- Individual Channel Configuration
- Open Wire Detection for Current Output
- RF Immunity
- 8 kV ESD Protection
- Power-on Value Setting
- Safe Value Setting
- Wide Operating Temperature Range: -25 to +75C
|
|
|
M-7028D_DESCRIPTION.html
The M-7028D is a 12-bit, 8-channel analog output module. It provides a programmable output range on all analog output channels (0 ~ 5 V, +/-5 V, 0 ~ 10 V, +/-10 V, +4 ~ +20 mA or 0 ~ +20 mA). Each analog output channel can be configured for an individual range and the module also features per-channel open wire detection for the +4 ~ +20 mA output, together with 8 kV ESD Protection as well as 3000 VDC intra-module isolation. Options for configuring power-on and safe values are also included.
M-7028D.html
Communication | Interface | RS-485 | Bias Resistor | Yes | Format | (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1) | Baud Rate | 1200 to 115200 bps | Protocol | Modbus RTU, DCON | Dual Watchdog | Yes, Module (1.6 Seconds), Communication (Programmable) | LED Indicators/Display | System LED Indicator | Yes, 1 LED as Power/Communication Indicator | I/O LED Indicators | 8 LEDs as Analog Output and Fault Indicators | 7-Segment LED Display | - | Isolation | Intra-module Isolation, Field-to-Logic | 3000 VDC | EMS Protection | ESD (IEC 61000-4-2) | ±8 kV Contact for each Terminal | RS Immunity (IEC 61000-4-3) | 3 V/m, 80 MHz ~ 1 GHz | EFT (IEC 61000-4-4) | ±4 kV for Power Line | Surge (IEC 61000-4-5) | - | Power | Reverse Polarity Protection | Yes | Input Range | +10 ~ +30 VDC | Consumption | 4.8 W | Mechanical | Dimensions (L x W x H) | 123 mm x 72 mm x 35 mm | Installation | DIN-Rail or Wall Mounting | Environment | Operating Temperature | -25 to +75C | Storage Temperature | -40 to +85C | Ambient Relative Humidity | 10 to 95% RH, Non-condensing | Analog Output | Channels | 8 | Current Output Wiring | Source | Range | 0 ~+5 VDC ±5 VDC 0 ~ +10 VDC ±10 VDC 0 ~ +20 mA +4 ~ +20 mA | Resolution | 12-bit | Accuracy | ±0.1% of FSR | DA Output Response Time | 10 ms per channel | Programmable Output Slope | Voltage: 0.0625 ~ 512 V/Second Current: 0.125 ~ 1024 mA/Second | Current Output Capacity | 500 O | Voltage Output Capability | 10 V @ 10 mA | Open Wire Detection | Yes, for the 4 ~ 20 mA output | Power-on Value | Yes, Programmable | Safe Value | Yes, Programmable |
|
|
|
l');
?>
|