|
|
|
M-7024R - 4-channel Voltage Output, Current Output, Analog Output and 5-channel Digital Input Module with DCON and Modbus Protoc
by ICP DAS
|
|
|
|
4-channel Voltage Output, Current Output, Analog Output and 5-channel Digital
Input Module with DCON and Modbus Protocol, communicable over Modbus RTU and
RS-485, supports operating temperatures between -25 ~ +75°C
|
|
|
The M-7024R is a 14-bit 4-channel analog output module that provides current
and voltage outputs. There are options for power-on values and safe values. It
features 3000 VDC intra-module isolation.
The M-7024R is the same as the I-7024 and provides additional 5-channel
digital inputs and 4 KV ESD protection on each terminal.
The M-7024R support Modbus RTU and DCON protocols and can be configured via
software. Their hardware specifications are the same as those of the
I-7024/I-7024R.
- 4-channel Analog Output
- 5-channel Digital Input for I-7024R/M-7024R
- Software Selectable Current or Voltage Output
- 14-bit Resolution
- Power-on Value Setting
- Safe Value Setting
- 3000 VDC Intra-Module Isolation
- Programmable Output Slope
- Dual Watchdog
- Wide Operating Temperature Range: -25 ~ +75°C
|
Analog Output |
|
Output Channels |
4 |
|
Range |
0 ~ 5 V, +/- 5 V, 0 ~ 10 V, +/- 10 V, 0 ~ 20 mA, 4 ~ 20 mA |
|
Resolution |
14-bit |
|
Accuracy |
0.1% |
|
DA Output Response Time |
10 ms |
Open Wire Detection
(for current only) |
- |
|
Channel to Channel Isolation |
- |
|
Power-on Value |
Yes |
|
Safe Value |
Yes |
|
Digital Input |
|
Channels |
5 |
|
Input Type |
Dry Contact (Source) |
|
Contact Level |
On Voltage Level |
Close to GND |
|
Off Voltage Level |
Open |
|
Counters |
Max. Count |
16-bit (65535) |
Max. Input
Frequency |
50 Hz |
|
Min. Pulse Width |
10 ms |
System Specifications
|
Communication |
|
Interface |
RS-485 |
|
Format |
(N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1) |
|
Baud Rate |
1200 ~ 115200 bps |
|
Accuracy |
Modbus RTU, DCON |
|
Dual Watchdog |
Yes, Module (1.6 Seconds), Communication (Programmable) |
|
LED Indicator/Display |
|
System LED Indicator |
Yes, 1 LED as Power/Communication Indicator |
|
I/O LED Indicator |
- |
|
7-Segment LED Display |
- |
|
Isolation |
Intra-Module Isolation,
Field-to-Logic |
3000 VDC |
|
EMS Protection |
|
ESD (IEC 61000-4-2) |
+/-4 kV |
|
EFT (IEC 61000-4-4) |
+/-4 kV |
|
RS (IEC 61000-4-3) |
5 V/m, 80 MHz ~ 1GHz |
|
Power |
|
Reverse Polarity Protection |
Yes |
|
Input Range |
10 ~ 30 VDC |
|
Consumption |
3.2 W |
|
Mechanical |
|
Dimensions (W x L x H) |
72 mm x 123 mm x 35 mm |
|
Installation |
DIN-Rail or Wall Mounting |
|
Environment |
|
Operating Temperature |
-25 ~ +75°C |
|
Storage Temperature |
-40 ~ +85°C |
|
Humidity |
10 ~ 95% RH, Non-condensing |
|
|
