M-7024L_DESCRIPTION.html
The M-7024L is a family of network data acquisition and control modules that support Modbus RTU. They can be remotely controlled using a set of commands called DCON protocol. With the Modbus RTU protocol, it can easily communicate with most popular SCADA/ HMI software and PLCs.
M-7024L.html
| Analog Output |
| Output Channels |
4 |
| Output Type |
0~20mA, 4~20mA, 0~5V, +/-5V, 0~10V, +/-10V |
| Resolution |
12-bit |
| Accuracy |
+/-0.1% of FSR |
| Zero Drift |
Voltage output : +/-30uV/C |
| Current output : +/-0.2uA/C |
| DA Output Response Time |
10ms per channel |
| Span Temperature Coefficient |
+/-20ppm/ C |
| Programmable Output Slope |
0.125 to 2048 mA/ second
0.0625 to 1024 V/
second |
| Current load resistor |
External +24V power : 1050Ohms |
| Intra-module Isolation, Field to Logic |
3000 VDC |
| Interface |
| Interface |
RS-485 |
| Format |
N, 8, 1 |
| Baud Rate |
1200 ~ 115200bps |
| LED Display |
| 1 LED as Power/ Communication indicator |
| Power |
| Input |
+10 to +30 Vdc |
| Power Consumption |
2.4W |
| Protocol |
| Modbus RTU, DCON |
Yes |
| Environment |
| Operating temperature |
-25 to 75C |
| Storage temperature |
-40 to 85C |
| Humidity |
5 to 95% RH, non-condensing |
|
