I-87063W - 4-channel Isolated digital input & 4 channel Isolated output module
by ICP DAS

I-87063W has a serial bus (RS-485) communication interface with DCON protocol. It can be used with our WinPAC, viewPAC, and XPAC controllers. I-87063W is an 4-channel Isolated Digital Input and 4-channel Relay Output Module with 16-bit Counters. I-87063W is a serial cartridge based I/O module that offers the ultimate in cost effective flexibility.

Digital Input
Input Channels	4 (Sink/Source)
Input Type	Isolation, Differential
On Voltage Level	+3.5V ~ 30V
Off Voltage Level	+1V max
Input Impedance	3K Ohms, 0.25W
Counters	Channels : 4
	Max. Counters : 16-bit (65535)
	Max. Input Frequency : 100Hz
	Min. Pulse Width : 5ms
Intra-module Isolation, Field to Logic	3750Vrms
4KV ESD Protection	Yes, contact for each terminal
Digital Output
Output Channels	4
Output Type	Power Relay, Form C
Operating Voltage Range	5A (NO)/3A(NC)@5 ~ 24VDC
	5A(NO)/3A(NC)@0 ~ 250VAC
Relay Contact Voltage Range	5A(NO)/3A(NC)@30VDC
	5A(NO)/3A(NC)@277VAC
Max. load Current	5A(NO)/3A(NC)
Max. Operate Time	10 ms Max.
Max. Release Time	5 ms Max.
Insulation Resistance	Min. 1000 MOhms, at 500VDC
Dielectric Strength	Between Open Contacts : 750VAC, 50/60Hz (at 1 Minute)
	Between Coil and Contacts : 4000VAC, 50/60Hz (at 1 Minute)
Relay Life	Mechanical : 5 million ops (no load).
	Electrical : 100, 000 Min. (rated load)
4KV ESD Protection	Yes, contact for each terminal
LED Display
1 LED as Power/ Communication Indicator
8 LEDs as Digital Input and Relay output Indicators
Power
Power Consumption	1.5 W
Environment
Operating Temperature	-25 to 75 °C
Storage Temperature	-30 to 75 °C
Humidity	5 to 95% RH, non-condensing
Dimensions
30mm x 102mm x 115mm(W x L x H)

I-87063W.pdf

413 K