WISE-7504M - Configurable I/O Controller with 4 Analog Inputs, 4 Analog Outputs, 4 Digital Inputs and 2 Ethernet ports. Supports
by ICP DAS

WISE-7504M is a multi-function module with 4-channel analog inputs, 4-channel analog outputs and 4-channel digital inputs module. WISE-7540M provides multiple programmable analog inputs, and analog outputs. Each of its analog inputs can configure a proper range of 240 Vrms high voltage protection. WISE-7504M follows IEEE 802.3af-compliant Power over Ethernet (PoE) specification, allowing it to receive power from PoE enabled network by Ethernet pairs. In additional to this, WISE-7504M is equipped with two-port ethernet switch to implement daisy-chain topology; reducing the cost and allowing easy cabling. By integrating with IF-THEN-ELSE rule engine, WISE-7504M provides more powerful functions such as I/O Moniitoring/Control, Counter, Timer, Schedule, E-mail sending & CGI Command sending for use in various industrial applications. WISE-7504M also supports Modbus TCP and MQTT protocol to make seamless integration with SCADA, IT and IoT (Internet of Things) system.

Analog Input

Channels	4 (Differential)
Type	±500 mV, ±1 V, ±5 V, ±10 V,+0 mA to +20 mA, ±20 mA, 4 to 20 mA (Jumper Selectable)
Resolution	16-bit
Sampling Rate	10 Samples/Second (Total)
Accuracy	±0.1 %
Zero Drift	±20 ±V/C
Span Drift	±25 ppm/C
Overvoltage Protection	240 Vrms
Overcurrent Protection	50 mA Max. at 110 VDC/VAC Max.
Common Voltage Protection	±200 VDC
Overcurrent Protection	Yes, 50 mA at 110 VDC
Virtual Channel to Channel Isolation	Yes, 400 VDC
Open Wire Detection for 4 ~ 20 mA	Yes

Input Impedance	Voltage	2 MO
	Current	125 O

Common Mode Rejection	86 dB Min.
Normal Mode Rejection	100 dB

Analog Output

Channels	4
Type	+0 VDC to +5 VDC, ±5 VDC, +0 VDC to +10 VDC,±10 VDC,+0 mA to +20 mA, +4 mA to +20 mA (Jumper Selectable)
Resolution	12-bit
Accuracy	±0.1% of FSR
Voltage Output Capability	20 mA @ 10 V
Current Load Resistance	400 O
Open Wire Detection	Yes, for 4 to 20 mA only

WISE-7504M.pdf

682 K