|
|
|
ICP DAS PET-7244 - 8 Channel DI wet, and 8 Channel DO with 300 mA / Channel
by ICP DAS
|
|
|
|
PoE Ethernet I/O Module with 2-port Ethernet Switch, with 8-ch Digital Input (32-bit Counters), 8-ch Digital Output. Support for both Modbus TCP and Modbus UDP Protocols. Built-in Web Server. Has operating temperature range of -25°C ~ +75°C (-13°F ~ +167°F)
|
|
|
- Built-in Web Server
- Web HMI
- Support for both Modbus TCP and Modbus UDP Protocols
- Communication Security
- 2-port Ethernet Switch for Daisy-Chain Topology
- Dual Watchdog
- Wide Operating Temperature Range: -25 ~ +75°C
- I/O Pair Connection
- Built-in I/O
- DI/Counter: 8 Channels
- DO: 8 Channels
The ET-7044/PET-7044/ET-7244/PET-7244 provides 8 wet contact digital input channels and 8 sink-type digital output channels. It features optical isolation for 3750 Vrms of transient overvoltage protection but doesn’t provide channel-to-channel isolation. Each input channel can be used as a 32-bit counter and each output channel can drive 300 mA load. The power-on value and safe value of digital output channel are programmable. It can safely be used in applications where hazardous voltages are present.
| Software |
| Built-In Web Server |
Yes |
| Web HMI |
Yes |
| I/O Pair Connection |
Yes |
| Communication |
| Ethernet Port |
2 x RJ-45, 10/100 Base-TX, Swtich Ports |
| PoE |
Yes |
| Protocol |
Modbus/TCP, Modbus/UDP |
| Security |
ID, Password and IP Filter |
| Dual Watchdog |
Yes, Module (0.8 second), Communication Programmable over DCON |
| LED Indicators |
| for (System Running) |
Yes |
| for (Ethernet Link/Act) |
Yes |
| for DI/DO status |
Yes |
| PoE Power |
Yes |
| 2 Way Isolation |
| Ethernet |
- |
| I/O |
2500 VDC |
| EMS Protection |
| ESD (IEC 61000-4-2) |
4 kV Contact for Each Terminal and 8 kV Air for Random Point |
| EFT (IEC 61000-4-4) |
+/-4 kV for Power |
| Power Requirements |
| Reverse Polarity Protection |
Yes |
| Powered from Terminal Block |
Yes, 12 ~ 48 VDC |
| Powered from PoE |
Yes, IEEE 802.3af, Class 1 |
| Consumption |
3.5 W (Max) |
| Mechanical |
| Dimensions (W x L x H) |
76 mm x 120 mm x 38 mm |
| Installation |
DIN-Rail or Wall mounting |
| Environmental |
| Operating Temperature |
-25°C ~ +75°C (-13°F ~ +167°F) |
| Storage Temperature |
-30°C ~ +80°C (-22°F ~ 176°F) |
| Humidity |
10 ~ 90% RH, non-condensing |
I/O Specifications
| Digital Input/Counter |
| Channels |
8 |
| Contact |
Wet Contact |
| Sink/Source (NPN/PNP) |
Sink/Source |
| On Voltage Level |
+10 VDC ~ +50 VDC |
| Off Voltage Level |
+4 VDC Max. |
| Over Voltage Protection |
+70 VDC |
| Counters |
Max. Count |
4,294,967,285 (32 bits) |
| Max. Input Frequency |
500 Hz |
100 Hz |
| Min. Pulse Width |
1 ms |
5 ms |
| Input Impedance |
10 kΩ |
| Digital Output |
| Channels |
8 |
| Type |
Isolated Open Collector (Sink) |
| Max. Load Current |
300 mA/channel at 25°C
Direct Drive Power Relay Module |
| Load Voltage |
+10 VDC ~ +40 VDC |
| Overvoltage Protection |
60 VDC |
| Powered from PoE |
Yes, IEEE 802.3af, Class 1 |
| Overload Protection |
1.1 A |
| Short-circuit Protection |
Yes |
| Power-on Value |
Yes, Programmable |
| Safe Value |
Yes, Programmable |
|
|
|
|
