I-7188XBD-CAN_DESCRIPTION.html
The I-7188XBD-CAN PACs (Programmable Automation Controller) are powered by 80188-40 processor with 512K bytes of static RAM, and 512K bytes of Flash memory. All of them provide several communication interfaces to adapt to various applications, such as CAN port, RS-232 port and RS-485 port. Uses can program their application program flexibly with C/C++ language because of the built-in MiniOS7 operation system. Besides, the I-7188XBD-CAN series PACs have different I/O types for users to match their requirement. For I-7188XBD-CAN, it provides 1 open collector digital output channel and 1 digital input channel. It is useful for transfer the command from differential communication interface. Therefore, it can satisfy the applications with I/O demand. Therefore, the I-7188XBD-CAN series PACs are economic and convenient solution for diversification CAN application.
I-7188XBD-CAN.html
| Hardware | | CPU | 80186, 40 MHz or compatible | | SRAM/Flash/EEPROM | 512 KB / 512 KB / 2 KB | | NVRAM | 31 bytes (battery backup, data valid for up to 10 years) | | RTC (Real Time Clock) | Yes | | WDT(watchdog) | CPU built-in | | Hardware Serial No. | 64-bit hardware serial No. | | ESD Protection | 4 kV class A. | | CAN Interfrace | | Controller | NXP SJA1000T with 16 MHz clock | | Transceiver | NXP 82C250 | | Channel Number | 1 | | Connector | 5-pin screwed terminal block (CAN_L, CAN_H, N/A for others) | | Baud Rate (bps) | 10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 M (allow user-defined baud rate) | | Transmission Distance (m) | Depend on baud rate (for example, max. 1000 m at 50 kbps ) | | Isolation | 1000 VDC for DC-to-DC, 2500 Vrms for photo-couple | | Terminator Resistor | Jumper for 120 ? terminator resistor | | Specification | ISO-11898-2, CAN 2.0A and CAN 2.0B | | UART Interface | | COM 1 | RS-485/RS-232 (cant be used simultaneously) | | COM 1 Connector | 2-pin screwed terminal block (DATA+, DATA-)
5-pin screwed terminal block (TxD, RxD, RTS, CTS, GND) | | COM 2 | RS-485 (Self-turner inside) | | COM 2 Connector | 2-pin screwed terminal block (DATA+, DATA-) | | Transmission Distance (m) | Depend on baud rate (for example, max. 1200 m at 9.6 kbps ) | | Baud Rate (bps) | 110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 | | LED | | Round LED | L1 LED, L2 LED, L3 LED | | 5-digit 7 segment | Yes | | Power | | Power Supply | Unregulated +10 ~ +30 VDC | | Protection | Power reverse polarity protection, Over-voltage brown-out protection | | Power Consumption | 3 W | | Mechanism | | Installation | DIN-Rail | | Dimensions | 72mm x 33mm x 122mm (W x L x H) | | Environmental | | Operating Temperature | -25C ~ +75C (-13F ~ +167F) | | Storage Temperature | -40C ~ +80C (-40F ~ +176F) | | Ambient Relative Humidity | 5 ~ 95% RH, non-condensing |
|
