|
|
|
I-7532 - Two Channel CAN Bus Bridge helps establish a connection between two CAN bus Systems in a network.
by ICP DAS
|
|
|
|
I-7532_SUMMARY.html
- Microprocessor inside with 72MHz
- 82C250 CAN transceiver
- 2500 VRMS photo coupler isolation on the CAN side
- 3KV galvanic isolation among the power supply and 2 CAN channels
- Support both CAN 2.0A and CAN 2.0B
- Fully compatible with the ISO 11898-2 standard
- Build-in jumper to select 120O terminal resistor
- Watchdog inside
- Up to 100 CAN nodes on each channel
- Transmission distance up to 1 km on each CAN port
- Removable terminal block, Mount easily on DIN-rail
- 768 frame buffer for each CAN channel
- The baud of each channel can be different for highly flexibility
Applications:
- Control System
- Building Automation
- Factory Automation
- Distributed data acquisition
|
|
|
I-7532_DESCRIPTION.html
I-7532 - Two Channel CAN Bus Bridge helps establish a connection between two CAN bus Systems in a network. Supports operating temperatures between -25 to 75°C. This product is phased out.
I-7532.html
| I-7532
|
| Mocro Controller |
32 bit Microprocessor inside with 72MHz
|
| CAN Port Channels |
2
|
| CAN Transceiver |
Philip 82C250
|
| CAN Connector |
10-pin removable screw terminal
|
| Buad Rate selection by rotary switch |
5K, 10K, 20K, 50K, 80K, 100K, 125K, 200K, 250K, 400K,
500K, 600K, 800K and 1Mbps
|
| Isolation |
2500 VRMS photo couple isolation between 2 CAN
channel
3000 VDC galvanic isolation among the power supply and 2 CAN channel
|
| Terminator Resistor |
Selectable 120O terminator resistor by jumper
|
| Support Protocol |
CAN 2.0A/2.0B
|
| Power Requirement |
Unregulated +10VDC ~ +30 VDC Power reverse protection,
Over-Voltage brown-out protection
|
| Power Consumption |
2W max
|
| Operation Temp. |
-25C to 75C
|
| Storage Temp. |
-40C to 80C
|
| Humidity |
5~95% non-condensing
|
| Dimensions |
122 mm × 72 mm × 33 mm
|
|
|
|
l');
?>
|
