|
|
|
ICP DAS PISO-C64 - 64 isolated open collector output
by ICP DAS
|
|
|
|
64 Channel Optically Isolated Open-Collector Digital Output Board. Includes CA-4037B able and two CA-4002 D-Sub connectors
|
|
|
The PISO-C64 has 64-channels of optically isolated digital outputs, arranged into two isolated banks. Each digital output offers a darlington transistor and integral suppression diode for inductive load. Isolated output channels are designed into group C and Group D. The power supply of the input port may use external power or the power from the PC side using DC/DC converter. The power supply of the output port should use external power. This interface board is easily installed in any PC/AT/XT compatible computer. The board interfaces to field logic signals, which eliminates ground-loop problems and isolates the host computer from damaging voltages. The ISO-C64 has one 37-pin D-Sub Connector and one 40-pin male header. Users can connect the digital signal through the second D-Sub connector. Each D-Sub connector contains 32 output channels.
- 64-channel optically isolated digital output /open collector
- Four isolated bank.
- 3750VDC isolation voltage
| Isolation Input |
| Type |
Isolated open collector : 100mA per channel(NPN) |
| External voltage |
30V (Max.) |
| Response time |
1Khz Typical |
| Power requirements |
+5V 800mA (typical) |
| Environment |
| Operating temperature |
0° - 50°C |
| Storage temperature |
-20°C - 70°C |
| Humidity |
0 to 90% non-condensing |
| Dimensions |
180mm x 105mm |
|
|
|
|
