|
|
WF-2572 - Industrial Ethernet to Wifi Bridge by ICP DAS
|
|
|
WF-2572_SUMMARY.html
- Frequency: 2.4/5 GHz
- Full compatible with IEEE 802.11 a/b/g
- Support Wi-Fi Limit-AP and Infrastructure mode
- Support WPA-PSK, WPA2-PSK for Wi-Fi encryption
- Plug-and-Play Ethernet to Wi-Fi connectivity
- USB-based configuration
- No driver installation required
- Built-in Watchdog
- Extended operating temperature range (-25C ~ +75C)
|
|
|
WF-2572_DESCRIPTION.html
The WF-2572 is an Industrial Ethernet to Wi-Fi Bridge. The device only needs to connect the Ethernet cable with WF-2572 that can create an IEEE 802.11 a/b/g wireless personal network. The interface between Ethernet and Wi-Fi use transparent transmission so that it can convert Wi-Fi to wire internet without complex settings. The WF-2572 also supports dual bands (2.4/5 GHz). The 2.4 GHz is more crowded than 5 GHz. Therefore, the devices on 2.4 GHz suffer much more interference than the ones on 5 GHz. The WF-2572 will have less interference on 5 GHz.
WF-2572.html
Antenna
|
Omni-Directional
3 dBi @ 2.4 GHz
5.5 dBi @ 5 GHz
|
Standard Supported
|
IEEE 802.11b/g
|
Frequency
|
2.4 GHz: CH1~11
5 GHz: CH36,40,44,48
|
Operation Mode
|
Limit-AP / Infrastructure
|
Encryption
|
Open/ WPA/ WPA2
|
Transmission Range
|
50 meters (LOS)
|
Controller
|
100 Base-TX Ethernet Controller (Auto-MDIX)
|
Connector
|
RJ-45 with LED indicator
|
Type
|
USB 2.0 Full-Speed
|
Connector
|
USB type B
|
System Status
|
3 Indicator LEDs (PWR, LINK, COMM)
|
Signal Strength
|
3 Indicator LEDs (High, Mid, Low)
|
Input Voltage Range
|
10V ~ 30V
|
Power Consumption
|
1.6W
|
Casing
|
Plastic
|
Installation
|
DIN-Rail
|
Dimensions
|
33mm x 95mm x 120mm (W x L x H)
|
Operating Temperature
|
-25? ~ +75 ?
|
Storage Temperature
|
-30? ~ +80?
|
Humidity
|
10 ~ 90%
|
|
l');
?>
|