|
|
|
I-7520AR - RS-232 to RS-422/RS-485 Converter with a din rail mount. Supports operating temperatures between -25 to 75C
by ICP DAS
|
|
|
|
I-7520AR_SUMMARY.html
- Protocol: RS-422/485
- Connector: plug-in screw terminal block
- Speed: "Self Tuner" inside, auto switching baud
rate, from 300 to 115200 BPS
- 256 modules max in one RS-485 network
without repeater
- 2048 modules max in one RS-485 network with
repeater
- Isolation voltage: 3000V
- Isolation site: RS-422/485
- Repeater request: 4,000 feet or over 256
modules
- Power requirements: +10V dc ~ +30V dc
- Power consumption: 0.05A@24V; Max
|
|
|
I-7520AR_DESCRIPTION.html
I-7520AR - RS-232 to RS-422/RS-485 Converter with a din rail mount. Supports operating temperatures between -25 to 75°C (-13F ~ 167F).
I-7520AR.html
- Input : RS-232 protocol to female 9 pin connector
- Output: RS-485 protocol
- Speed: "Self Tuner" inside, auto switching baud rate, 300~115200 BPS
- 256 modules max. in one RS-485 network without repeater
- 2048 modules max. in one RS-485 network with repeater
-
Isolation voltage: 3000VDC at RS-485 side
- Repeater request: 4,000 feet or over 256 modules
- Power consumption: 2.2W max.
- Din Rail Mount
This model is used for PLC user. The design of isolation between I-7520 and I-7520R is different. If the
user wants to supply the power from the PLC they should use the I-7520R; Otherwise the isolation will be broken.
Please refer to the manual I-7000 bus converter for more detailed information.
|
l');
?>
|
