Item
|
I-7565-H1
|
I-7565-H2
|
Hardware |
CAN Port Channels |
1
|
2
|
CAN Interface |
Controller |
Microprocessor inside with 72MHz
|
Microprocessor inside with 72MHz
|
Transceiver |
NXP 82C250
|
NXP 82C250
|
Connector |
9-pin D-sub connector
|
10-pin terminal-block connector
|
Baud Rate (bps) |
5K ~ 1Mbps or User-defined baud rate
|
5K ~ 1Mbps or User-defined baud rate
|
Isolation |
3000VDCfor DC-to-DC 2500Vrms for
photo-couple
|
3000VDCfor DC-to-DC 2500Vrms for
photo-couple
|
Terminator Resistor |
Selectable 120O terminator resistor by jumper
|
Selectable 120O terminator resistor by jumper
|
Specification |
ISO-11898-2, CAN 2.0A and CAN 2.0B
|
ISO-11898-2, CAN 2.0A and CAN 2.0B
|
Pin Assignment |
C.I.A. DS-102 (CAN_H=7, CAN_L=2)
|
(CAN1: CAN_H=4, CAN_L=2 ) / (CAN2: CAN_H=9,
CAN_L=7 )
|
Receive Buffer |
256 data frames
|
128 data frames for each CAN port
|
Max Data Flow |
3000 fps
|
3000 fps (Total CAN ports)
|
USB Interface |
Connector |
USB Type B
|
USB Type B
|
Transmission speed |
12M kbps
|
12M kbps
|
Specification |
USB 1.1 and USB 2.0 standard
|
USB 1.1 and USB 2.0 standard
|
Receive Buffer |
100 data frames
|
100 data frames
|
LED |
Round LED |
PWR / RUN /ERR LED
|
PWR / RUN /ERR LED
|
Software |
Driver |
Windows 2K/XP, Linux WinCE (available soon)
|
Windows 2K/XP, Linux WinCE (available soon)
|
Power |
Power supply |
By USB interface
|
By USB interface
|
Power Consumption |
1.5 W
|
1.5 W
|
Dip Switch |
Init (Firmware Update) / Normal (Firmware
Operation)
|
Init (Firmware Update) / Normal (Firmware
Operation)
|
Mechanism |
Installation |
DIN-Rail
|
DIN-Rail
|
Dimensions |
108mm x 72mm x 35mm (H x W x D)
|
108mm x 72mm x 35mm (H x W x D)
|
Environment |
Operating Temp. |
-25 ~ 75 ?
|
-25 ~ 75 ?
|
Storage Temp. |
-40 ~ 80 ?
|
-40 ~ 80 ?
|
Humidity |
5 ~ 95% RH, non-condensing
|
5 ~ 95% RH, non-condensing
|