|
|
|
tM-7530A - Tiny UART RS-232/422/485 to CAN Converter
by ICP DAS
|
|
|
|
tM-7530A_SUMMARY.html
- Compatible with CAN specification 2.0A and 2.0B
- Fully compatible with ISO 11898-2 standard
- Support various CAN baud rate from 10K bps to 1M bps
- Support user-defined CAN baud rate
- Support various UART baud rate from 110 bps to 230400 bps
- Build-in selectable 120 ? terminator resistor
- Software configurable CAN and UART communication parameters
- Power, data flow, and error indicator for CAN and UART
- Watchdog inside
- Support pair connection mode
- Software buffer on CAN bus side and UART side
- Support user-defined end of characters on pair connection mode
- Support listen only mode Support time stamp response on UART side
|
|
|
tM-7530A_DESCRIPTION.html
tM-7530A UART/CAN converters can help users to implement the communication between UART and CAN network. ICP DAS provides a new solution of UART /CAN converter-tM-7530A. The tM-7530A is a tiny UART/CAN converter to fit narrower environment as a result of its small size. It has isolation on power side and on CAN bus side and its performance is faster than other UART/CAN module. The function of tM-7530A is full compatibly with I-7530 and I-7530T. In additional, it provides new function such as listen only mode. User can use this function to listen to CAN bus messages and error detection. tM-7530A is an economical and practical UART/CAN converter solution.
tM-7530A.html
|
Transceiver
|
NXP TJA1042
|
|
Channel number
|
1
|
|
Connector
|
7-pins screwed terminal block(CAN_H, CAN_L, CAN_GND)
|
|
Baud Rate (bps)
|
10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 Mbps
|
|
Isolation
|
3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
|
|
Terminator Resistor
|
Build-in selectable 120 ? terminator resistor
|
|
Specification
|
ISO-11898-2, CAN 2.0A and CAN 2.0B
|
|
COM
|
RS-232, RS-485, RS-422
|
|
Connector
|
10-pins screwed terminal block
|
|
Baud Rate (bps)
|
110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400
|
|
Data bit
|
5, 6, 7, 8
|
|
Stop bit
|
1, 2
|
|
Parity bit
|
None, Even, Odd
|
|
Round LED
|
ON LED: Power and Data Flow; ERR LED: Error Status
|
|
Power
|
+10 ~ +30 VDC
|
|
Protection
|
Power reverse polarity protection, Over-voltage brown-out protection
|
|
Power Consumption
|
1W
|
|
Installation
|
DIN-Rail
|
|
Dimensions
|
52mm x 93mm x 27mm (W x L x H)
|
|
Operating Temp.
|
-25 ~ 75C
|
|
Storage Temp.
|
-30 ~ 80C
|
|
Humidity
|
10 ~ 90% RH, non-condensing
|
|
l');
?>
|
