|
|
|
PET-7024 - PoE Ethernet I/O Module with 4-channels AO, 5-channels DI and 5-channels DO (RoHS)
by ICP DAS
|
|
|
|
PET-7024_SUMMARY.html
- Built-in Web Server
- Web HMI
- Support for both Modbus TCP and Modbus UDP Protocols
- Communication Security
- Dual Watchdog
- Wide Operating Temperature Range: -25 ~ +75C
- I/O Pair Connection
- Built-in I/O
- AO: 4 Channels
- DI/Counter: 5 Channels
- DO: 5 Channels
|
|
|
PET-7024_DESCRIPTION.html
ICP DAS USA's Ethernet I/O PET-7024 module is equipped with multifunction 4 channels analog output, 5 channels digital input and 5 channels digital output. The PET-7024 provides a variety of programmable analog output options (+/-5 V, +/-10 V, 0 ~ 20 mA and 4 ~ 20 mA), and each analog output can be programmed to accept either current or voltage as output depending upon the position of corresponding jumper. The PET-7024 is fully RoHS compliant and provides 4 kV ESD protection as well as 2500 VDC intra-module isolation.
PET-7024.html
System Specifications
|
Built-In Web Server
|
Yes
|
|
Web HMI
|
Yes
|
|
I/O Pair Connection
|
Yes
|
|
Ethernet Port
|
1 x RJ-45, 10/100 Base-TX
|
|
PoE
|
Yes
|
|
Protocol
|
Modbus/TCP, Modbus/UDP
|
|
Security
|
ID, Password and IP Filter
|
|
Dual Watchdog
|
Yes, Module (0.8 second), Communication (Programmable)
|
|
for System Running
|
Yes
|
|
for Ethernet Link/Act
|
Yes
|
|
for DI/DO status
|
Yes
|
|
for PoE Power
|
Yes
|
|
ESD (IEC 61000-4-2)
|
±4 kV Contact for Each Terminal and ±8 kV Air for Random Point
|
|
EFT (IEC 61000-4-4)
|
±4 kV for Power Line
|
|
Surge (IEC 61000-4-5)
|
±0.5 kV for Power Line
|
|
Reverse Polarity Protection
|
Yes
|
|
Powered from Terminal Block
|
12 ~ 48 VDC
|
|
Powered from PoE
|
Yes, IEEE 802.3af, Class1-
|
|
Consumption
|
4.8 W (Max.)
|
|
Dimensions (L x W x H)
|
72 mm x 123 mm x 35 mm
|
|
Installation
|
DIN-Rail or Wall mounting
|
|
Operating Temperature
|
-25 to +75°C
|
|
Storage Temperature
|
-30 to +80°C
|
|
Humidity
|
10 to 90% RH, Non-condensing
|
I/O Specifications
|
Channels
|
4
|
|
Type
|
+0 VDC ~ +5 VDC, +/-5 VDC, +0 VDC ~ +10 VDC, +/-10 VDC, +0 mA ~ +20 mA, +4 mA ~ +20 mA
(Jumper Selectable)
|
|
Individual Channel Configuration
|
Yes
|
|
Resolution
|
12-bit
|
|
Accuracy
|
+/-0.1% of FSR
|
|
Voltage Output Capability
|
10 V @ 20 mA
|
|
Current Load Resistance
|
500 Ω
|
|
Open Wire Detection
|
Yes, for 4 ~ 20 mA only
|
|
Power-on Value
|
Yes, Programmable
|
|
Safe Value
|
Yes, Programmable
|
|
Dry Contact (Source)
|
On Voltage Level
|
Close to GND
|
|
Off Voltage Level
|
Open
|
|
Effective Distance for Dry Contact
|
500 Meters Max.
|
|
Wet contact (Sink Source)
|
On Voltage Level
|
+1 VDC Max.
|
|
Off Voltage Level
|
+3.5 VDC ~ +30 VDC
|
|
Counters
|
Channels
|
5
|
|
|
Max. Count
|
4,294,967,295 (32-bit)
|
|
Max. Input Frequency
|
100 Hz
|
|
Min. Pulse Width
|
5 ms
|
|
Overvoltage Protection
|
30 VDC
|
|
Channels
|
5
|
|
Type
|
Isolated Open Collector
|
|
Sink/Source (NPN/PNP)
|
Sink
|
|
Max. Load Current
|
600 mA/channel
|
|
Load Voltage
|
+5 VDC ~ +50 VDC
|
|
Overvoltage Protection
|
60 VDC
|
|
Overload Protection
|
1.4 A
|
|
Short-circuit Protection
|
Yes
|
|
Power-on Value
|
Yes, Programmable
|
|
Safe Value
|
Yes, Programmable
|
|
|
|
l');
?>
|
