M-7054PD_DESCRIPTION.html
M-7054PD - 16 channels for universal Digital Input/Output. The Digital Input channels can be used as 16-bit counters. The M-7054P provides ±8 kV ESD, ±4 kV EFT and ±3 kV surge protection and 3750 VDC intra-module isolation to enhance noise protection capabilities in industrial environments.
M-7054PD.html
| Communication | | Interface | RS-485 | | RS-485 Bias Resistor | No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785) | | Format | N, 8, 1 | | Baud Rate | 1200 to 115200 bps | | Protocol Voltage | Modbus RTU, DCON | | Dual Watchdog | Yes, Module (1.6 Seconds), Communication (Programmable) | | LED Indicator/Display | | System LED Indicator | Yes, 1 as Power/Communication Indicator | | I/O LED Indicator | - | | 7-Segment LED Display | - | | Isolation | | Intra-Module Isolation, Field-to-Logic | 3750 VDC | | EMS Protection | | ESD (IEC 61000-4-2) | ±8 kV Contact for each Terminal
±16 kV Air for Random Point | | EFT (IEC 61000-4-4) | ±4 kV for Power Line | | Power | | Reverse Polarity Protection | Yes | | Input Range | +10 ~ +30 VDC | | Consumption | 1.2 W | | Mechanical | | Dimensions (L x W x H) | 123 mm x 72 mm x 35 mm | | Installation | DIN-Rail or Wall Mounting | | Environment | | Operating Temperature | -25 to +75C | | Storage Temperature | -40 to +85C | | Humidity | 10 to 95% RH, Non-condensing | | Universal Digital Input/Output | | Channels | 16-channel Isolated Universal Digital Input/Output (Configurable via Wire Connection) | | Digital Input | Dry Contact | ON Voltage Level | Close to GND | | OFF Voltage Level | Open | | Counters | Max. Count | 16-bit (0~65535) | | Max. Input Frequency | 100 Hz | | Min. Pulse Width | 10 ms | | Overvoltage Protection | ±60 VDC | | Digital Output | Output Type | Sink | | Max. Load Current | 500 mA | | Load Voltage | +5 ~ 50 VDC | | Overvoltage Protection | 60 VDC | | Overload Protection | Yes | | Short Circuit Protection | Yes | | Power-on Value | Yes, Programmable | | Safe Value | Yes, Programmable |
|
