|
|
|
ICP DAS Profi-8455 - Profibus I/O Expansion Rack with 4 slots
by ICP DAS
|
|
|
|
PROFIBUS Remote I/O Unit with 4 Expansion Slots
|
|
|
The PROFI-8455 Remote I/O Unit is specially designed for the slave device of PROFIBUS DP protocol. It supports up to 4 slots for ICPDAS I-8K series, I-87K Low Profile series, and I-87K High Profiles series I/O modules. In addition, we also provide hot-swap function for I-87k High Profiles series I/O modules. To setup network, users can choose and configure I/O modules by using the GSD file without any other setting tools.
- Applications:
- Industrial Automation
- Factory Automation
- Flow Chart of PROFI-8455:
| Protocol & Hierarchy |
DP-V0 Slave |
| Supports Transmission Rate (Kbps) |
9.6, 19.2, 45.45, 93.75, 187.5, 500, 1500, 3000, 6000, 12000 |
| Transmission Rate Setting |
detected automatically |
| Address Setting |
0~126 set by Rotary switches |
| Indicators |
PWR, ERR, and RUN LEDs |
| I/O modules Configuration |
Configured by GSD file |
| Supports I/O modules hot-swap |
i-87K High Profile series |
| Network Isolation Protection |
High Speed iCoupler |
| DC Isolation Protection |
3000VDC on PROFIBUS side |
| CPU |
80186, 80MHz |
| Flash |
512K Bytes |
| SRAM |
512K Bytes |
| EEPROM |
2K Bytes |
| Watch Dog Timer |
CPU Built-in |
| Com1 |
RS-232(Firmware update port) |
| PROFIBUS Interface |
9-pin D-Sub(Female) |
| PROFIBUS Controller |
Siemens SPC3 |
| PROFIBUS Transceiver |
ADI ADM2486 iCoupler Isolated Transceiver |
| Transmission Rate |
Up to 12Mbps |
| I/O Expansion Slot |
4 Slots |
| Power Requirement |
10V ~ 30V |
| Power Supply |
25W |
| Power Consumption |
5W |
| Operating Temp. |
-25℃ ~ +75℃ |
| Storage Temp. |
-30℃ ~ +85℃ |
| Humidity |
5% ~ 95% |
| Dimensions |
230 mm x 110 mm x 90 mm |
|
|
|
|
