|
|
M-2017 - 8-channel Isolated Analog Input Module With High Voltage Protection by ICP DAS
|
|
|
M-2017_SUMMARY.html
- 8-channel Differential Analog Input
- DIP Switch Selectable Voltage or Current Input
- 240 Vrms Overvoltage Protection
- Supports Fast and Normal Mode Sampling
- 4 kV ESD and EFT Protection
- Overcurrent Protection
- Individual Channel Configuration
- Dual Watchdog
- 3000 VDC Intra-Module Isolation, Field to Logic
- Wide Operating Temperature Range: -25C to 75C
|
|
|
M-2017_DESCRIPTION.html
ICP DAS USA's M-2017 is an Analog Input module that is equipped with 8 differential Analog Input channels. The module provides a programmable input range on all Analog Input channels, and each channel can be configured for an individual input range, providing a high overvoltage protection of 240 Vrms and 50mA overcurrent protection at 110 VDC/VAC. Voltage and current input is DIP switch selectable. The sampling rate for the M-2017 module is adjustable and can be configured to either fast or normal mode. The module also features per-channel open wire detection for current input of 4 to 20 mA, and provides 8 kV ESD protection, 4 kV EFT protection, 2 kV surge protection, and 3000 VDC intra-module isolation. The M-2017 module supports both the Modbus RTU and DCON protocols, which can be configured via software.
M-2017.html
System Specifications
Interface
|
RS-485
|
Bias Resistor
|
Yes, 1kΩ bias resistor by switch selectable
|
Format
|
N81, N82, E81, O81
|
Baud Rate
|
1200 to 115200 bps
|
Protocol
|
Modbus RTU, DCON
|
Dual Watchdog
|
Yes, Module (1.6 Seconds), Communication (Programmable)
|
System LED Indicator
|
Yes, 1 as Power/Communication Indicator
|
I/O LED Indicators
|
-
|
7-Segment LED Display
|
-
|
Intra-module Isolated, Field-to-Logic
|
3000 VDC
|
ESD (IEC 61000-4-2)
|
8 kV Contact for each terminal and 16 kV Air Random Point
|
EFT (IEC 61000-4-4)
|
±4 kV for Power
|
Surge (IEC 61000-4-5)
|
±2 kV for power liner
|
Reverse Polarity Protection
|
Yes
|
Input Voltage Range
|
+10 ~ +48 VDC
|
Power Consumption
|
0.7 W
|
Dimensions (L x W x H)
|
110 x 33 x 96 mm
|
Installation
|
DIN-Rail
|
Operating Temperature
|
-25C to +75C
|
Storage Temperature
|
-30C to +80C
|
Relative Humidity
|
10 ~ 95% RH, Non-condensing
|
I/O Specifications
Input Channels
|
8 Differential
|
Input Range
|
Voltage
|
±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V
|
|
Current
|
±20 mA, 0 ~ 20 mA, 4 ~ 20 mA (DIP switch selectable)
|
Resolution
|
16-bit
|
Sampling Rate
|
Normal Mode: 10 Samples/Sec. (Total) Fast Mode: 60 Samples/Sec. (Total)
|
Accuracy
|
Normal Mode: ±0.1% of FSR Fast Mode: ±0.5% of FSR
|
Common Voltage Protection
|
+/-200 VDC
|
Overcurrent Protection
|
Yes, 50 mA at 110 VDC
|
Input Impedance
|
1 MΩ
|
Over Voltage Protection
|
240 Vrms
|
Individual Channel Configuration
|
Yes
|
Connection
|
20-Pin Removable Terminal Block
|
|
l');
?>
|