ICP DAS I-87053W - 16-channel Isolated digital input module
by ICP DAS

I-87053W has a serial bus (RS-485) communication interface with DCON protocol. It can be plugged into our WinPAC, XPAC, ViewPAC, I-8000 controllers and I-87K, RF-87K I/O expansion units. I-87053W is a 16-channel Isolated Digital Input Module with 16-bit Counters. I-87053W is a serial cartridge based I/O module that offers the ultimate in cost effective flexibility.

Digital Input
Input Channels	16 (Dry+Wet)
Dry Contact (Sink)	On Voltage Level: Close to GND
	Off Voltage Level: Open
	Effective Distance for Dry Contact: 500m Max.
Wet contact (Sink/ source)	On Voltage Level: +3.5V to +30VDC
	Off Voltage Level: +1V Max.
Input Impedance	3KOhm, 0.33W
Counters	Channels: 16
	Max. Counters : 16-bit (65535)
	Max. Input Frequency: 100Hz
	Min. Pulse Width; 5ms
Intra-module Isolation, Field to Logic	3750Vrms
4KV ESD Protection	Yes, contact for each terminal
LED Display
1 LED as Power/ Communication Indicator
16 LEDs as Digital Input Indicators
Power
Power Consumption	0.8W max
Environment
Operating Temperature	-25 to 75 °C
Storage Temperature	-30 to 75 °C
Humidity	5 to 95% RH, non-condensing
Dimensions
30mm x 102mm x 115mm(W x L x H) Detail

I-87053W.pdf

212 K