| Digital Input |
| Input Channel |
16 (Sink/Source) |
| Input Type |
One Common Power or One Common Ground for All Inputs |
| On Voltage Level |
+19V ~ +30V |
| Off Voltage Level |
+11V max |
| Input Impedance |
3.25K Ohms, 0.25W |
| Isolation Voltage |
3750Vrms |
| Connection |
20-Pin Removable Terminal Block |
| Interface |
| Isolation Voltage |
3000Vrms |
| 2-wire cabling |
2-wire cabling Belden 8941 (2P twisted-pair cable),
When different cables are used, the transmission distance may change |
| Transfer distance |
Max. 400m for speed 250K
Max. 100m for speed 1M(Default) |
| LED Indicators |
Power, Communication Run, Communication Error, Terminal resistor, Digital output |
| Transfer speed |
250Kbps and 1Mbps(Default)
DIP Switch Settings |
| Cyclic scan time |
2.88ms for speed 250K
0.72ms for speed 1M(Default) |
| Power |
| Input Voltage Range |
+10 ~ +30VDC (Non-isolation) |
| Power consumption |
2.4W Max |
| Connection |
5-Pin Removable Terminal Block |
| EMS Protection |
| ESD |
4KV for power liner, Communication line and each channel |
| EFT |
1KV for power liner |
| Surge |
0.5KV for power liner |
| Case |
| Case |
Plastic |
| Flammability |
UL 94V-0 materials |
| Dimensions |
32.5mm x 110mm x 102mm (W x H x D) |
| Installation |
DIN-Rail |
| Mechanical |
| Operating Temperature |
-25 °C~ +75°C |
| Storage Temperature |
-30 ~ +85°C |
| Ambient Relative Humidity |
10 to 90% RH, non-condensing |
