| DeviceNet Interface |
| DeviceNet Specification |
Volume I, Release 2.0 & Volume II, Release 2.0, Errata5 |
| DeviceNet subscribe |
Group 2 Only Server |
| Connection supported |
1 connection for Explicit Messaging
1 connection for Polled I/O
1 connection for Bit-Strobe I/O |
Baud Rate
Setting by Rotary Switch |
125 kbps, 250 kbps, 500 kbps |
Node ID
Setting by Rotary Switch |
0 ~ 63 |
| Heartbeat message |
Yes |
| Shutdown message |
Yes |
| Terminator Resistor |
Switch for 120 Ω terminator resistor |
| Connector |
5-pin screwed terminal block
(CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+) |
| EDS file |
Yes |
| LED |
PWR/NET/MOD |
| PWM |
| Channels |
8 (Source) |
| Frequency |
0.2 ~ 500 kHz (non-continuous) |
| Scaling Resolution |
16-bit (1 ~ 128 μs for each step) |
| Duty Cycle |
0.1 ~ 99.9 % |
| PWM Mode |
Burst mode, Continuous mode |
| Burst mode counter |
1~65535 counts |
| Trigger Mode |
Hardware (Start and Stop) or Software (Start and Stop) |
| Intra-module Isolation |
3750 Vrms |
| ESD Protection |
4 kV Contact for each channel |
| Digital Input |
| Channels |
8 (Sink/Source) |
| ON Voltage Level |
+5.5 ~ +30 V |
| OFF Voltage Level |
<3.5 V |
| Counter Frequency |
500 kHz max. |
| Max. Counts |
32-bits (4,294,967,295) |
| Input Impedance |
4.7 kΩ, 1/4 W |
| Intra-module Isolation |
3750 Vrms |
| ESD Protection |
4 kV Contact for each channel |
| LED |
| DeviceNet Status |
3 LEDs for PWR/NET/MOD |
| Terminal Resister |
1 LED as Terminal Resister indicators |
| PWM LED |
8 LEDs as PWM Output indicators |
| DI LED |
8 LEDs as Digital Input indicators |
| Power |
| Power Supply |
Unregulated +10 ~ +30 VDC |
| Power Consumption |
2 W |
| Mechanism |
| Installation |
DIN-Rail |
| Dimensions |
32.3 mm x 99 mm x 77.5 mm ( W x L x H ) |
| Environment |
| Operating Temp. |
-25 ~ +75 ℃ |
| Storage Temp. |
-30 ~ +80 ℃ |
| Humidity |
10 ~ 90% RH, non-condensing |
