I-7531-FD - Two-channel Isolated CAN / CAN FD Signal Repeater. Supports operating temperatures between -25 to 75C.
by ICP DAS

The I-7531-FD is a CAN/CAN FD signal repeater, which can connect two or more CAN networks with the same baud rate. Based on the signal repeat function of I-7531-FD, users can use different numbers of I-7531-FD to combine tree-shaped and star-shaped CAN network topology, and when there are too many devices on the CAN network, using I-7531-FD can increase the driving force of the CAN signal to drive more CAN devices. In addition, the CAN side of the I-7531-FD has a digital isolation of 2500 Vrms, and the CAN side and the power side also provide 3000 V DC-DC isolation protection, which can effectively isolate the noise interference between CAN networks ,and achieve protection the purpose of a specific CAN network.

CAN
Ports	2
Baud Rate	CAN bus: 5 k ~ 800 kbps
	CAN FD: Arbitration rate up to 1000 kbps, data rate up to 8000 kbps
	NOTE: The data rates are verified by tests, but user-defined baud rates are possible, so the maximum data rate will depend on the concrete operating conditions (cable length, remote stations, etc.).
Isolation	2500 Vrms for digital isolation, and 3000 V for DC-DC
Terminal Resistor	Build in 120 ohms terminal resistor and support jumper to select
Specification	ISO-11898-2, CAN 2.0A/B and CAN FD
	(CAN FD support ISO and Non-ISO standards)
Time Delay	Typ. 175ns (corresponds to ~35m CAN bus length)
Power
Input Range	+10 VDC ~ +30 VDC
Consumption	1 W
Mechanical
Casing	Plastic
Dimensions (mm)	72 x 118 x 33 (W x L x H)
Installation	DIN-Rail
Environmental
Operating Temperature	-25 ~ + 75 C
Storage Temperature	-30 ~ + 80 C
Humidity	10 ~ 90% RH, non-condensing

I-7531-FD.pdf

369 K