|
|
|
I-7530A - RS-232/485/422 to CAN Converter with Software Utility. Supports operating temperatures between -25 to 75C.
by ICP DAS
|
|
|
|
I-7530A_SUMMARY.html
-
Microprocessor inside with 20MHz
- CAN interface connector: D-Sub 9-pin
-
82C250 CAN transceiver
-
Built-in CAN/RS-232/485/422 Converter firmware
-
Max transmission speed up to 1M bps for CAN and 115.2K bps for RS-232/485/422
-
Software configurable CAN and RS-232/485/422 communication parameters
-
Max transmission distance over 1000m (follow CAN specification)
-
Support both CAN 2.0A and CAN 2.0B
-
Built-in jumper to select 120 ohm terminal resister
-
Mount easily on DIN-rail
-
Power, data flow and error indicator for CAN and RS-232/485/422
-
Watchdog inside
-
Support transparent communication mode
-
Provide the transparent communication between the RS-232/485/422 devices via CAN bus.
-
Enable different RS-232/485/422 devices into an individual group in CAN bus network.
(Full-duplex communication mode of RS-232/422 devices is not supported)
- Applications
- Control Systems
- Building Automation
- Factory Automation
- Distributed data acquisition
|
|
|
I-7530A_DESCRIPTION.html
The I-7530A is designed to unleash the power of CAN bus via RS-232/485/422 communication method. It accurately converts messages between CAN and RS-232/485/422 networks. This module let you to communicate with CAN devices easily from any PC or devices with RS-232/485/422 interface.
I-7530A.html
| CAN Interface |
| Controller |
Multiprocessor inside with 20MHz |
| Transceiver |
AMIS 41682 |
| Channel number |
1 |
| Connector |
9-pin male D-Sub (CAN_L, CAN_SHLD, CAN_H, N/A for others) |
| Baud Rate (bps) |
10 k, 20 k, 50 k, 125 kbps |
| Terminator Resistor |
1 k for CAN_H and CAN_L |
| Specification |
ISO-11898-3, CAN 2.0A and CAN 2.0B |
| Receive Buffer |
1000 data frames |
| UART Interface |
| COM |
RS-232 |
| COM Connector |
9-pin female D-Sub (DCE: TxD, RxD, GND, N/A for others) |
| Baud Rate (bps) |
110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps |
| Data bit |
5, 6, 7, 8 |
| Stop bit |
1, 2 |
| Parity |
None, Even, Odd |
| Receive Buffer |
900 data frames |
| LED |
| Round LED |
ON LED: Power and Data Flow; ERR LED: Error |
| Power |
| Protection |
Power reverse polarity protection, Over-voltage brown-out protection |
| Power Consumption |
1 W |
| Mechanism |
| Installation |
DIN-Rail |
| Dimensions |
118mm x 72mm x 33mm |
| Environment |
| Operation Temp. |
-25 ~ 75 C |
| Storage Temp. |
-40 ~ 80 C |
| Humidity |
5 ~ 95% RH, non-condensing |
|
l');
?>
|
