|
|
|
ICP DAS ISO-P64 - 64 isolated digital input
by ICP DAS
|
|
|
|
ISA Board with 64 Channels of Isolated Digital Input. Includes one CA-4037W cable and two CA-4002 D-Sub connectors.
|
|
|
The ISO-P64 has 64-channel isolated digital input board, arranged into four isolated banks. Each input channel use a photo-coupler input which allows either internal power supply or external power selected by jumper. Isolated input channels 0~15 are designed into group A, channels 16~31 are designed into group B, Isolated input channels 32~47 are designed into group A, channels 48~63 are designed into group B. The power supply of the input port may use the external power or the power from the PC side using DC to DC converter. The board interface to field logic signals, eliminating ground-loop problems and isolating the host computer from damaging voltages. The ISO-P64 has one 37-pin D-sub connector and one 40-pin header. The 40-pin to D-sub 37 flat cable is used to fix with the case. The user can connect the digital signal through the second D-sub connector. Each D-sub connector contains 16 inputs channel and 16 output channel.
- 64-channel optically isolated digital input
- DC/DC converter build-in
- Four isolated bank
- Built-in DC/DC converter with 3000 VDC isolation
- Interrupt handling
- Interrupt source : channel 0 and channel 16
- 3750 Vrms photo-isolation protection
| Digital Input |
| Isolation Voltage |
3750 Vrms (Using external power)
3000 Vrms (Using internal power) |
| Channels |
64 |
| Compatibility |
Photo coupler isolated |
| Input Voltage |
Logic 0: 0 ~ 1 V
Logic 1: 9 ~ 24 V |
| Input Impedance |
3 KΩ, 0.5 W |
| Response Speed |
4 kHz (Typical) |
| General |
| Bus Type |
ISA |
| Data Bus |
8-bit |
| I/O Connector |
Female DB37 x 1
40-pin Box header x 1 |
| Dimensions (L x W x D) |
175 mm x 115 mm x 22 mm |
| Power Consumption |
400 mA @ +5 V |
| Operating Temperature |
0 ~ 60 °C |
| Storage Temperature |
-20 ~ 70 °C |
| Humidity |
5 ~ 85% RH, non-condensing |
|
|
|
|
