|
|
|
A-812PG - 12 Bit Multifunction Board with 70KS/s sampling rate, 16 Channel Analog Input, 2 Channel unipolar Analog Output, 16 Di
by ICP DAS
|
|
|
|
Multifunction 70KS/s 12 bit Analog and Digital I/O ISA Board with 16 single ended Analog inputs, 2 Analog outputs, 16 digital inputs and 16 digital outputs. Includes one 16 bit timer/counter and software development kit.
|
|
|
A-812PG is a 12-bit multifunction analog and digital I/O board for PC/AT compatible computers. A-812PG offers 16 single-ended plus two channels of analog output with 12-bit resolution. A-812PG has 16 digital inputs, 16 digital outputs, and one timer/counter channel. A-812PG Provides gains of 1, 2, 4, 8, and 16. It has a maximum sampling rate of 62.5K samples/s. DMA operation is jumper selectable for levels 1 or 3. Interrupts are jumper selectable between 3 and 15.
- 12-bit A/D converter
- 12-bit D/A converter
- 16 single-ended
- 62.5 k/s sampling rate
- Two 12-bit analog output channel
- Analog Output Range : 0 ~ 5V , 0 ~10V
- Software programmable gain :1, 2, 4, 8, 16
- Interrupt handling
- A/D Trigger modes :
- Software Trigger
- Pacer Trigger
- External Trigger
- Event Trigger
- A/D data transfer modes :
- 16 digital input & 16 digital output
- Software:
- Toolkit for DOS
- Toolkit for Windows 95/98
- Toolkit for Windows NT
- Toolkit for Windows 2000/XP
- Toolkit for Labview 95/98
- Toolkit for Labview NT
- Toolkit for Labview 2000/XP
- ActiveX Control (OCX) 95/98
- ActiveX Control (OCX) NT
- ActiveX Control (OCX) 2000/XP
- Toolkit for LINUX
- Toolkit for DasyLab
- Applications:
- Signal analysis
- Industrial automation
- Laboratory automation
- Sensor interface
- FFT & frequency analysis
- Transient analysis
- Production test
- Process control
| Analog Input |
| Channels |
16-channel single-endded or 8-channel differential |
| Resolution |
12-bit |
| Convertion rate |
62.5K sample /sec |
| Input Impedance |
10,000M Ohm // 6p F |
| Over Voltage Protection |
+/- 35Vdc |
| INL (Max) |
+/- 1-bit |
| Sample & hold |
On chip |
| Zero Drift |
15ppm / deg C of Full Scale |
| D/A Output |
| Channels |
1 independent |
| Type |
12-bit double buffered |
| Linearity |
±1/2-bit |
| Output Range |
Internal reference 0~5V or 0~10V |
| External reference |
max +10V or -10V |
| Output Driving |
5mA |
| Digital I/O |
| Inputs(LSTTL) |
16 |
| Input low |
VIL = 0.8V max. ; IIL =-0.4mA max. |
| Input high |
VIH = 2.0V min. ; IIH = 20°A max. |
| Outputs (LSTTL) |
16 |
| Output low |
VOL = 0.5V max. @IOL =8mA max. |
| Output high |
VOH = 2.7V min; @IOH =-400°Amax. |
| Timer/Counter |
| Programmable Interval Timer |
(0.0045Hz ~ 0.5MHz) |
| Type |
82c54 |
| A/D pacer |
32-bit counter (A-822PGH/L) |
| A/D pacer |
16-bit counter (A-823PGH/L) |
| Interrupt channel |
3-15 jumper selectable |
| Environmental |
| Operation Temperature |
0°C to 50°C |
| Storage Temperature |
-20°C to 70°C |
| Humidity |
0-90%, non-condensing |
| Dimensions |
157cm x 106cm |
| Power Requirements |
+5V @850mA max. |
| Analog Input Range |
| Model |
A-8111 |
| Gain |
1 |
2 |
4 |
8 |
16 |
| Bipolar (V) |
+/- 5 |
+/- 2.5 |
+/- 1.25 |
+/- 0.625 |
+/- 0.3125 |
| Sampling Rate Max. |
125 kS/s |
125 kS/s |
125 kS/s |
125 kS/s |
35 kS/s |
|
|
