| Technology |
| Standards |
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow Control
IEEE 802.3af Power Over Ethernet
IEEE 802.3at Power Over Ethernet
Energy Efficient Ethernet (EEE) as per 802.3az; this provides power savings during idle network activity |
| Processing Type |
Store & forward, wire speed switching |
| MAC Address |
8K |
| Memory Bandwidth |
10 Gbps |
| Frame Buffer Memory |
1 Mbit |
| Jumbo Frame |
10K for Speed 1000M |
| Flow Control |
IEEE802.3x flow control, back pressure flow control |
| Inteface |
| RJ-45 Port |
10/100/1000 BaseT(X), 10/100BaseT(X) auto negotiation speed, full/half duplex mode, and auto MDI/MDI-X connection |
| Fiber Port |
1000BaseSFP slot/100BaseSFP slot |
| LED Indicators |
PWR1, PWR2, Power fail, 10/100M, 1000M, Link/Act, Power Device is detected |
| Ethernet Isolation |
1500 Vrms 1 minute |
| DIP Switch |
100BaseSFP/1000BaseSFP and PoE/PoE+ setting |
| Power Input |
| Redundant Input Range |
Flexible input +24/+48 VDC Nominal. ( +18 ~ +55 VDC) |
| Power Consumption |
0.13@ 48 VDC without PD loading; 3.1 A @ 48 VDC with PD full loading (30 W per ports)
0.25@ 24 VDC without PD loading; 6.2 A @ 24 VDC with PD full loading (30 W per ports) |
| Alarm Contact |
One relay output with current carrying capacity of 1A @ 30 VDC |
| Protection |
Power reverse polarity protection |
| Connector |
6-Pin Removable Terminal Block (Power & Relay) |
| Mechanical |
| Chassis |
Metal with an IP30 ingress protection rating |
| Dimensions (W x L x H) |
28 mm x 160 mm x 122 mm |
| Installation |
DIN-Rail or Wall Mounting (with optional kit) |
| Environment |
| Operating Temperature |
-40°C ~ +75°C (-40°F ~ +167°F ) |
| Storage Temperature |
-40°C ~ +85°C (-40°F ~ +185°F) |
| Ambient Relative Humidity |
10 ~ 90% RH, non-condensing |
