Need assistance or guidance?

Contact us @: 1-800-301-9097
Login / Register Contact Us
 
RGS-P9000-LV -  Industrial modular rack mount managed Gigabit Ethernet switch with 4 slots, low-voltage power input by ORing Industrial Networking

RGS-P9000-LV - Industrial modular rack mount managed Gigabit Ethernet switch with 4 slots, low-voltage power input
by ORing Industrial Networking

Write a review Write a review
  • Modular designed makes network planning easy
  • Supports O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) for Ethernet Redundancy
  • O-Chain allow multiple redundant network rings
  • *note Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function
  • Support IEEE 1588v2 clock Synchronization

*NOTE: This function is available by request only

Mfg SKU # : RGS-P9000-LV
Our Price : $2,792.00
Stock : Call for Availability
Quantity :
RGS-P9000-LV is modular managed redundant ring Ethernet switch with 4 slots. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And support wide operating temperature from -40°C to 85°C (If use 10G SFP module then operating temperature is -20°C ~ 60°C). RGS-9000 can also be managed centralized and convenient by Open-Vision, as well as the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
ORing Switch Model RGS-P9000-LV
Physical Ports  

Slot Number

4 (up to 3 slots for 8x1G ports and 1 slot for 4x10G port)
Technology  
Ethernet Standards

IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ab for 1000Base-T
IEEE 802.z for 1000Base-X
IEEE 802.3ae for 10Gigabit Ethernet
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)

MAC Table 32K
Priority Queues 8
Processing Store-and-Forward
Switch Properties

Switching latency: 7 us
Switching bandwidth: 128Gbps
Max. Number of Available VLANs: 4095
VLAN ID Range : 1 to 4094
IGMP multicast groups: 128 for each VLAN
Port rate limiting: User Define

Jumbo frame Up to 10K Bytes
Security Featues

Device Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
MAC-based authentication
MAC address limit
VLAN (802.1Q ) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Https / SSH enhance network security
Web and CLI authentication and authorization
IP source guard

Software Features

IEEE 1588v2 clock synchronization
IEEE 802.1D Bridge, auto MAC address learning/aging and MAC address (static)
Multiple Registration Protocol (MRP)
MSTP (RSTP/STP compatible)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging
IGMP v2/v3 Snooping
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client
DHCP Relay
Modbus TCP
SMTP Client
SNTP Server

Network Redundancy

O-Ring
O-Chain
*note MRP
MSTP(RSTP/STP compatible)

RS-232 Serial Console Port RS-232 in RJ-45 connector with console cable. 115200bps, 8, N, 1
LED Indicators  
Power Indicator (PWR) Green : Indicates that the system ready. The LED is blinking when the system is upgrading firmware
Power Indicator (PWR1 / PWR2) Green : Power LED x 2
Ring Master Indicator (R.M.) Green : Indicates that the system is operating in O-Ring Master mode
O-Ring Indicator (Ring)

Green : Indicates that the system operating in O-Ring mode
Green Blinking : Indicates that the Ring is broken.

Fault Indicator (Fault) Amber : Indicate unexpected event occurred
Reset To Default Running Indicator (DEF) Green : System resets to default configuration
Supervisor Login Indicator (RMT) Green : System is accessed remotely
Smart LED Display system

Link/Act(LK/ACT) / Speed(SPD) / Duplex(FDX) / Remote (RMT) green LED indicator x 4
Mode select Button (MODE) : Link/Act(LK/ACT) / Speed(SPD) / Duplex(FDX) / Remote (RMT) mode select button Port 1 ~ 28 Link/Act(LK/ACT) LED show : Green x 28

Fault Contact  
Relay Relay output to carry capacity of 1A at 24VDC
Power  
Redundant power input modular Dual 24/48VDC (24~72VDC) power inputs at terminal block (Note 2)
Power Consumption (Typ.) 46Watts max.
Overload Current Protection Present
Physical Characteristics  
Enclosure 19 inches rack mountable
Dimensions (W x D x H) 440 (W) x 325 (D) x 44 (H) mm (17.32x12.8x1.73 inches)
Weight (g) 6450 g
MTBF(mean time between failures)  
Time 246,537hrs (Note 1)
Environmental  
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature 24VDC~36VDC
10G SFP+ module absent : -40 to 75°C
24VDC~36VDC
10G SFP+ module used: -20 to 50 °C
36VDC~72VDC
10G SFP+ module absent : -40 to 85°C
36VDC~72VDC
10G SFP+ module used: -20 to 60 °C
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals  
Power Automation IEC 61850-3, IEEE 1613
EMI FCC Part 15, CISPR (EN55022) class A
EMS IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11
EMC EN50121-4 (EN50121-1)
Safety UL 60950-1
Transport NEMA TS1&TS2

Copyright © 2024 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.