|
|
LMP-1002G-10G-SFP-24 - 10-Port Industrial PoE+ Light Layer 3 Gigabit Managed Ethernet Switch, with 8*10/100/1000Tx (30W/Port) an by ANTAIRA
|
|
|
LMP-1002G-10G-SFP-24_SUMMARY.html
- Supports 8*10/100/1000Tx IEEE 802.3af/at Compliant with 30W/Port\xa0
- Supports 2*1G/10G SFP+ Slots
- Network Redundancy Support: RSTP/MSTP, and G.8032 ERPS (Recovery Time <50ms)
- Supports IPv4/IPv6, and DHCP Option 66/67/82
- Supports Modbus/TCP Protocol for Device Management and Monitoring
- Supports IGMP v1/v2 for Multicast Traffic Filtering
- IEEE802.1Q VLAN for Easy Network Planning
- Power Input: 12-55VDC in 6-Pin Terminal Block
- Reverse Polarity Protection
- IP30 Protection
- DIN-Rail or Wall Mountable
- Operating Temperature Range - STD: -40 to 60C
|
|
|
LMP-1002G-10G-SFP-24_DESCRIPTION.html
Antaira's LMP-1002G-10G-SFP-24 is a 10-port industrial Gigabit PoE+ light layer 3 managed Ethernet switch embedded with 8*10/100/1000Tx Ethernet ports that support IEEE 802.3af/at for a maximum of 30W/port, and 2*1G/10G dual rate SFP+ slots for up to 10 Gigabit fiber connections. It is a fully manageable light layer 3 Ethernet switch that is pre-loaded with a user-friendly web management console design. It supports the ring network redundancy function using the market's open standard ITU-T G.8032 ERPS (Ethernet Ring Protection Switch) protocol that has a <50ms network recovery time. The advanced network filtering and security functions, such as, IGMP, VLAN, QoS, SNMP, RMON, ModbusTCP, and 802.1X/HTTPS/SSH/SSL increase determinism and improve network management for remote SCADA systems or control networksThe LMP-1002G-10G-SFP-24 is IP30 rated, DIN-rail mountable, and supports a standard operating temperature range of -40C to 60C that uniquely runs on an input voltage of 12-55 VDC. It also provides high EFT and ESD protection for industrial networking applications, such as, power/utility, water wastewater, oil/gas/mining, factory automation, security surveillance, ITS, or any other outdoor or harsh environment.
|
|
|
l');
?>
|