Antaira LNP-0802-S3-24-T

Port) + 2100Fx Single-mode 30Km,
by ANTAIRA

Network broadcast storm protection
6-Port IEEE 802.3at compliant PoE+ Function with 30W/Port
2-Port 100Fx ST type connector with 30Km Single-Mode
Supports Auto MDI/MDI-X Function
Store-and-Forward Switching Architecture
2K MAC Address Table
Surge Protection: 2,000 VDC support
ESD Protection: 6,000 VDC support
Redundant Power Input Design – 12~36VDC
Built-in 1 relay output for Port Break Alarm
IP30 Rugged Aluminum Case Design
DIN-Rail and Wall Mount support
Operating Temperature range - STD: -10° to 70° C, EOT: -40° to 75° C

Description
Specification
Datasheet

Antaira LNP-0802-S3-24-T

Antaira’s LNP-0802-24 series switch is a smart 8-port Industrial Unmanaged Ethernet Switch that supports IEEE-802.3at (Power-over-Ethernet Plus) on ports 1 to 6. The industrial PoE switch comes with 2 x 100Fx ports with SC or ST type connectors and supports Multi-mode in 2Km, or Single-mode in 30Km. The LNP-0802-24 series industrial switch supports a dual power input having a low voltage range (12~36VDC) and a built-in voltage booster, allowing the unit to give a full 48VDC PoE power for any mobile PoE application or any low voltage power sourcing environment. The LNP-0802-24 series industrial Ethernet switch provides up to 30 watts of power per port. This industrial PoE switch can be used to power IEEE 802.3af or 802.3at compliant power devices (PD), eliminating the need for additional wiring, and supports IEEE 802.3/802.3u/802.3x with 10/100BTx, full or half duplex, and MDI/MDI-X auto sensing to provide an economical solution for the Industrial Ethernet Network. In addition, the Network Broadcast Storm Protection and built-in relay warning function alerts network engineers when power failures or port breaks occur.

Antaira LNP-0802-S3-24-T : 8-Port Industrial PoE+ Unmanaged Ethernet Switch, w/ 6*10/100Tx (30W/Port) + 2*100Fx (Sc) Single-Mode 30Km, 12VDC-36VDC; EOT: -40ºC~75ºC

Recently Viewed Items