The INJ-102GT-24V PoE Injector is not only an IEEE802.3at compliant device
with intelligent detection that provided 2-ports 10/100/1000Base-T(X) PoE
outputs. The device does not turn on power until it detects a valid PoE
signature from the PoE devices attached downstream on the Ethernet cable. This
protection against damage to non-PoE compliant equipment which may be connected
to the Ethernet cable. Because of this intelligent detection, only an IEEE
802.3at/af compliant device can be powered with the INJ-102GT-24V PoE Injector.
Typically in Gigabit networks the maximum allowable CAT5 cable length is about
100 meters, due to the limitation of the Ethernet standards. Because of its
12~57V insertion, the installer doesn't need to worry about voltage drops caused
by cable length. The INJ-102GT-24V PoE Injector can function with any PoE P.D.
equipment which is fully compliant with the IEEE 802.3at/af PoE standards.
Note: P.D. side must be fully compliant IEEE 802.3at/af standard in order for
the power supply to be able to sense the PoE devices signature and apply power.
Power is supplied on Ethernet pins 1/2 (V+) and 3/6 (V-).
