|
|
|
ICP DAS NSM-208-M12 - EN50115 8 Port with M12 connectors Ethernet Switch
by ICP DAS
|
|
|
|
EN50155 8-port M12 Unmanaged Ethernet Switch designed for industrial applications in harsh environment. Includes M12D-4P-IP68 x 8, A-CAP-M12M x 8, M12A-5P-IP68 and A-CAP-M12F x 1. Supports Operating Temperatures of -40 ~ +75°C (-40F ~ 167F).
|
|
|
 The NSM-208-M12 is designed for industrial applications in harsh environments. The M12 connectors ensure tight, provides robust connections, and guarantees reliable operation;, even for applications that are subject to high vibration and shock.
The Ethernet switch supports IEEE 802.3/802.3u/802/3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing, and provides an economical solution for your industrial Ethernet network.
The NSM-208-M12 provides a wide range of 12 to 53 VDC power to fit common power standards found in industrial automation, without external power converters. The wide power input lowers installation and maintenance costs.
- Each port supports both 10/100 Mbps speed auto negotiation
- Supports Operating Temperatures of -40 ~ +75°C
- 8-port 10/100 Mbps M12 type connector with IP40 protection
- EN50155-certified for harsh railway standards
- Automatic MDI/MDI-X crossover for plug-and-play
- Store-and-forward architecture
- Full duplex IEEE 802.3x and half duplex backpressure flow control
- NEMA TS-2-2003 V02.06 Traffic Control Verification of Conformity
- EN 50121-1: 2006 & EN 50121-4: 2006 Railway Verification of Conformity
- EN 50155: 2007 & EN 50121-3: 2006 Railway for EMC Verification of Conformity
| Models |
NSM-208PSE-M12 |
NSM-208-M12 |
| Technology |
| Standards |
IEEE 802.3, 802.3u, 802.3x, 10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection |
| Processing Type |
Store & forward |
| MAC Addresses |
1024 |
| Memory Bandwidth |
3.2 Gbps |
| Frame Buffer Memory |
512 Kbit |
| Flow Control |
IEEE 802.3x flow control, back pressure flow control |
| Interface |
| LED Indicators |
PWR, Link/Act, Power Device is detected |
PWR, Link/Act |
| Ethernet Isolation |
1500 Vrms 1 minute |
| Connection |
Female 4-Pin shielded M12 D-coding connector X 8 |
| Power Input |
| Input Voltage Range |
+46 VDC ~ +53 VDC |
+12 VDC ~ +53 VDC |
| Power Consumption |
0.12 A @ 48 VDC without PD loading
3.0 A @ 48 VDC with PD full loading |
0.12 A @ 48 VDC |
| Protection |
Power reverse polarity protection |
| Connection |
Male 5-Pin shielded M12 A-coding connector X 1 |
| PoE Technology |
| PoE Compliance |
100% IEEE 802.3af compliant |
– |
| Power Consumption |
PSE (Power Sourcing Equipment) |
– |
| PoE Voltage |
+46 ~ +48 VDC depending on power input |
– |
| PoE Power |
Up to 15.4 W per port |
– |
| PoE Operation |
Automatic detection and power management |
– |
| PoE Pin Assignments |
V+ (Pin 1, 3), V- (Pin 2, 4) |
– |
| PoE Disconnect Mode |
DC disconnect |
– |
| Mechanical |
| Casing |
Metal with IP40 |
| Dimensions (W x L x H) |
190 mm x 56 mm x 100 mm |
| Installation |
Wall Mounting |
| Environmental |
| Operating Temperature |
-40 °C ~ + 75 °C |
| Storage Temperature |
-40 °C ~ + 85 °C |
| Ambient Relative Humidity |
10 ~ 95% RH, non-condensing |
|
|
