ICP DAS NS-105A - Unmanaged 5-port Industrial Ethernet Switch with Power Input +12 VDC ~ +53 VDC (RoHS)
by ICP DAS

The NS-205/NS-205A/NS-105A has 5 Ethernet Switching ports that support 10/100 Base-TX, with a 10/100M autonegotiation feature and auto MDI/MDI-X function. It can connect 5 workstations and automatically switches the transmission speed (10 Mbps or 100 Mbps) for corresponding connections. The flow control mechanism is also negotiated. There is activity/link/data rate LEDs for each port to aid trouble-shooting. Port connectors are shielded RJ-45. It contains "soft start" function with overload protection, high-low voltage protection. The width of the NS-205/NS-205A is just 33 mm, so it can be used where space is limited.

Models		NS-205R	NS-205	NS-205A	NS-105A
Technology
Standards		IEEE 802.3, 802.3u, 802.3x
Processing Type		Store & forward; wire speed switching
MAC Addresses		1024		2048
Frame Buffer Memory		256 Kbit		768 Kbit
Flow Control		IEEE 802.3x flow control		IEEE 802.3x flow control, back pressure flow control
Interface
RJ-45 Ports		10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
LED Indicators		Power, Link/Act, 10/100M
Ethernet Isolation		1500 Vrms 1 minute
EMS Protection		Yes
Cable	Ethernet	2-pair UTP/STP Cat.3, 4, 5, EIA/TIA-568 100 ?
	Fast Ethernet	2-pair UTP/STP Cat. 5, EIA/TIA-568 100 ?
Redundant Power
Input Voltage Range		+10 ~ +30 VDC (Non-isolated)		+12 ~ +56 VDC (Non-isolated)	+12 ~ +53 VDC (Non-isolated)
Power Consumption		0.1 A @ 24 VDC
Protection		Power reverse polarity protection
EMS Protection		Yes
Connector		3-Pin Removable Terminal Block			5-Pin Removable Terminal Block
Mechanical
Casing		Plastic
Flammability		UL 94V-0
Dimensions (W x L x H)		33 mm x 78 mm x 107 mm			76 mm x 38 mm x 118 mm
Installation		DIN-Rail Mounting
Environment
Operating Temperature		-40C ~ +75C	-25C ~ +75C
Storage Temperature		-40C ~ +85C
Ambient Relative Humidity		10% ~ 90% RH, non-condensing

NS-105A.pdf

556 K