Need assistance or guidance?

Contact us @: 1-800-301-9097
Login / Register Contact Us
 
IGS-9084GP-FB2 - Rugged 8x 10/100/1000TX (RJ-45) + 4x 100/1000(SFP) with Fiber bypass by ORing Industrial Networking

IGS-9084GP-FB2 - Rugged 8x 10/100/1000TX (RJ-45) + 4x 100/1000(SFP) with Fiber bypass
by ORing Industrial Networking

Write a review Write a review
  • Supports O-Ring (recovery time < 30ms over 250 units of connection) and MSTP(RSTP/STP compatible) for Ethernet Redundancy
  • Open-Ring support the other vendor’s ring technology in open architecture
  • O-Chain allow multiple redundant network rings
  • Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function
  • Support IEEE 1588v2 clock Synchronization
  • Supports IPV6 new internet protocol version
  • Support Modbus TCP protocol
  • Provided HTTPS/SSH protocol to enhance network security
  • Support IEEE 802.3az Energy-Efficient Ethernet technology
  • Supports SMTP client
  • Supports IP-based bandwidth management
  • Supports application-based QoS management
  • Supports Device Binding security function
  • Supports DOS/DDOS auto prevention
  • IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
  • Supports SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
  • Support ACL, TACACS+ and 802.1x User Authentication for security
  • Supports 9.6K Bytes Jumbo Frame
  • Support 100M/1G/10G optical bypass function of 2 port duplex or 4 port simplex fiber connection
  • Bypass switching time < 10ms and throughput not affected and no extra delay
  • Multiple notification for warning of unexpected event
  • Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision) configuration
  • Support LLDP Protocol
  • Rigid IP-30 housing design
  • DIN-Rail and wall mounting enabled
IGS-9084GP-FB2 Series is managed redundant ring Ethernet switch with 8x10/100/1000Base-T(X) ports and 4x100/1000Base-X SFP ports and provided 4xLC connector optical bypass function. These fiber optical bypass switch protect the network from failures and Network maintenance by ensuring network integrity during power loss. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And support wide operating temperature from -40 oC to 70 oC. IGS-9084GP-FB2 Series can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
ORing Gigabit Switch Model IGS-9084GP-FB2-SS IGS-9084GP-FB2-MM
Physical Ports  
10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX 8
100/1000Base-X SFP Port 4
LC Bypass Port Type Single-Mode Multi-Mode
Technology  
Ethernet Standards IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ab for 1000Base-T
IEEE 802.z for 1000Base-X
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table 8K
Priority Queues 8
Processing Store-and-Forward
Switch Properties

Switching latency: 7 us
Switching bandwidth: 24Gbps
Max. Number of Available VLANs: 256
IGMP multicast groups: 128 for each VLAN
Port rate limiting: User Define

Jumbo frame Up to 9.6K Bytes
Security Featues Device Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q ) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Https / SSH enhance network security
Software Features STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging
IGMP Snooping
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client/Relay
SMTP Client
Modbus TCP
Network Redundancy

O-Ring
Open-Ring
O-Chain
MRP
MSTP (RSTP/STP compatible)

RS-232 Serial Console Port RS-232 in RJ45 connector with console cable. 115200bps, 8, N, 1
LED Indicators  
Power Indicator Green : Power LED x 3
R.M. Indicator Green : Indicates that the system is operating in O-Ring Master mode
Ring Indicator Green : Indicates that the system is operating in O-Ring mode
Fault Indicator Amber : Indicates unexpected event occurred
10/100/1000Base-T(X) RJ45 port Indicator Green for 1000Mbps Link/Act indicator. Amber for duplex indicator
100/1000Base-X SFP port Indicator Green for port Link/Act.
Fault Contact  
Relay Relay output to carry capacity of 1A at 24VDC
Power  
Redundant Input Power Dual DC inputs. 12~48 VDC on 6-pin terminal block
Power Consumption (Typ.) 13 Watts
Overload Current Protection Present
Physical Characteristics  
Enclosure IP-30
Dimensions (W x D x H) 96.4 (W) x 105.5 (D) x 154 (H) mm
3.8 (W) x 4.15 (D) x 6.06 (H) inch
Weight (g) 1205 g
Environmental  
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals  
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1

Copyright © 2024 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.