|
|
|
ICP DAS uPAC-5001D - uPAC-5001 with display
by ICP DAS
|
|
|
|
uPAC-5000 with LAN, LED display, communicable over Ethernet, RS-232, RS-485
|
|
|
Features
The μPAC-5XX1 series is an enhanced version of μPAC-7186EX. It provides C tool kits for C programmer. Owing to the bigger and special form factor design, the μPAC-5XX1 can add an internal wireless module, such as 2G, 3G, ZigBee, Wi-Fi, GPS for different wireless application. The optional I/O expansion board, XW-board, is two times larger than the X-board of μPAC-7186 and provides high-protection I/O. With built-in micro SD, the μPAC-5000 can be used as a data logger.
ICP DAS provides easy-to-use software development tool kits (Xserver, MiniOS7 framework, VxComm, Modbus libraries). Users can use them to easily integrate serial devices to have Ethernet/Internet communication ability and through the standard Modbus protocol to communicate with SCADA software (Indusoft, ISaGARF, DasyLab, Trace Mode, Citect, iFix, etc.).
- 80186, 80 MHz CPU
- MiniOS7 Inside
- C Language Programming
- TCP/IP Library
- Modbus Library
- Various Storage Media
- 512 KB Flash
- 16 KB EEPROM
- microSD
- 256 MB NAND Flash Disk
- Various Communication Interfaces
- 10/100 Base-TX Ethernet
- RS-232/485
- 64-bit Hardware Serial Number
- I/O Expansion Bus
- Redundant Power Inputs
- Operating Temperature: -25 ~ +75XC
| System Software |
| OS |
MiniOS7 (DOS-like embedded operating system) |
| Development Software |
| Download Interface |
RS-232 (COM1) or Ethernet |
| Language |
C language |
| Compilers |
TC++ 1.01, TC 2.01, BC++3.1 ~ 5.2x,
MSC 6.0, MSVC++
(before version 1.5.2) |
| CPU Module |
| CPU |
80186, 80 MHz |
| SRAM |
512 KB |
| Flash |
512 KB |
| microSD Expansion |
Yes, can support 1 or 2 GB microSD |
| NAND Flash Disk |
V |
| 512 KB Battery Backup SRAM |
V |
| EEPROM |
16 KB |
| NVRAM |
31 Bytes (battery backup, data valid up to 10 years) |
| RTC (Real Time Clock) |
Provide second, minute, hour, date, day of week, month, year |
| 64-bit Hardware Serial Number |
Yes, for Software Copy Protection |
| Watchdog Timers |
Yes (0.8 second) |
| Communication Ports |
| Ethernet |
RJ-45 x 1, 10/100 Base-TX (Auto-negotiating, Auto MDI/MDI-X, LED indicators) |
| COM 1 |
RS-232 (TxD, RxD, RTS, CTS, GND), non-isolated, Speed: 115200 bps max. |
| COM 2 |
RS-485 (Data+, Data-) with internal self-tuner ASIC; non-isolated, Speed: 115200 bps max. |
| LED Indicator |
| Programmable LED Indicators |
2 |
| LED Display |
5-digit 7-segment LED display for (D) versions |
| Hardware Expansion |
| I/O Expansion Bus |
Yes (for one XW-Board only) |
| Mechanical |
| Dimensions (W x H x D) |
91 mm x 123 mm x 52 mm |
| Installation |
DIN-Rail Mounting |
| Environmental |
| Operating Temperature |
-25 ~ +75XC |
| Storage Temperature |
-30 ~ +80XC |
| Ambient Relative Humidity |
10 ~ 90% RH (non-condensing) |
| Power |
| Input Range |
+12 ~ +48 VDC |
| Isolation |
V |
| Redundant Power Inputs |
Yes |
| Protection |
Power reverse polarity protection |
| Frame Ground |
Yes (for ESD Protection) |
| Power Consumption |
2 W; 2.5 W for (D) version |
|
|
|
|
