|
|
|
Antaira IVC-4011-T-V2 - IP30 Industrial Ethernet Extender, 4-Port RJ45 (LAN), 1-Port BNC, 1-Port RJ11 (-40°~ 75°C)
by ANTAIRA
|
|
|
|
IVC-4011-T-V2_SUMMARY.html
Features
- IP-30 metal case protection, DIN Rail and Wall Mount design
- ITU-T G.993.5 G.Vectoring and G.INP
- Upstream/Downstream bandwidth up to 200/100Mbps
- CO/CPE mode selectable via DIP switch
- Selectable target band plan and SNR margin
- Uses existing RG59/RG6 coaxial cable
- Used in pairs to extend Point-to-Point connection up to 1.2km
- Supports IEEE 802.1Q VLAN tag transparency
- Supports 6000 VDC Ethernet ESD protection
- 12 to 48V DC, 24V AC
- Redundant power with polarity reverse protect function
- Support extensive LED indicators for network diagnostics
|
|
|
IVC-4011-T-V2_DESCRIPTION.html
IVC-4011-T-V2 - is an Industrial Ethernet Extender that has a switching architecture with 4 RJ-45 10/100/1000Mbps Ethernet ports and one asymmetric or symmetric Ethernet over VDSL port - the VDSL port can be RJ-11 or BNC connector. The embedded BNC or RJ-11 port is allowing customers to continue using their existing network with the current coaxial cable or telephone wire without the need of rewiring.
The IVC-4011-T-V2 provides a high level of immunity to electromagnetic interference and heavy electrical surges typical of environments like plant floors or in curbside traffic control cabinets. The IVC-4011-T-V2 designs with IP-30 metal case with DIN Rail or Wall Mount support. It also can operate under any extreme ambient weather temperature range from -40 to 75 degree C.
IVC-4011-T-V2.html
| Standards |
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
ITU-T G.993.1
VDSL
ITU-T G.997.1
ITU-T G.993.2 VDSL2 (Profile 17a/30a Support)
ITU-T G.993.5 G.Vectoring
and G.INP
ITU-T G.998
|
| VDSL Compliance |
VDSL-DMT
ITU-T G.993.1 VDSL
ITU-T G.997.1
ITU-T G.993.2 VDSL2 (Profile 17a/30a
Support)
ITU-T G.993.5 G. Vectoring
ITU-T G.998 G.INP
|
| ADSL Compliance |
Capable of ADSL2/2+ standard
ITU G.992.3 G.dmt.bis
ITU G.992.5 G.dmt.bisplus
Data Rate: Up
to 24Mbps
|
| Ports |
10/100/1000Base-TX: 4 RJ-45, auto negotiation and auto-MDI / MDI-X
Coaxial: 1 BNC, female
connector
Phone-Line: 1 RJ-11, female connector
|
| LED Indicators |
Power 1/Power 2: Green
Fault: Red
1000BASE-T LNK/ACT: Green
10/100BASE-TX LNK/ACK:
Green
VDSL: Green
CO: Green
CPE: Green
|
| Dip Switch |
4 Position DIP Switch
|
| Cabling |
Coaxial cable: 75 ohmRG-6/U cable, less than12Ω/1000 ft RG-59/U cable, less than 30Ω/1000 ft. Max.
1.2km with data transmission (3.937ft.))
Twisted-pair telephone wires (AWG-24 or better) up to
1.2km (3.937ft.)
|
| Functionality |
Select CO or CPE mode
Select G.INP or Interleaved mode
Select Band Profile (Asymmetric or
Symmetric)
Select SNR of 12dB or 8dB
|
| Switching Architecture |
Store-and-Forward
|
| MAC Table Size |
2K
|
| Flow Control |
Back pressure for half duplex IEEE 802.3x pause frame for full duplex
|
| Jumbo Frame |
9K bytes
|
| Housing |
Metal, IP30 protection
|
| Dimensions |
32 x 87.8 x 135 mm (W x H x D)
|
| Weight |
Unit: 0.41 lb
Shipping: 0.71 lb
|
| Mounting |
DIN-Rail mounting, Wall mounting
|
| Input Voltage |
DC Input: Dual 12~48V DC, 0.4A max. 24V AC
|
| ESD Protection |
6KV DC
|
| Power Consumption |
5.7 Watts
|
| Operating Temperature |
-40°C to 75°C
|
| Storage Temperature |
-40°C ~ 85°C
|
| Ambient Relative Humidity |
5 to 90%, (non-condensing)
|
| Certifications |
FCC Part 15 Class A, CE
|
|
|
|
|
