ADAM-4022T-AE The ADAM-4000 series is a set of intelligent sensor-to-computer interface analog I/O modules containing a built-in microprocessor. They are remotely controlled through a simple set of commands issued in ASCII format and transmitted in RS-485 protocol.The 4000 series provide signal conditioning, isolation, ranging, A/D and D/A conversion, data comparison, and digital communication functions. Some modules provide digital I/O lines for controlling relays and TTL devices.Buy and compare our RS-485 I/O modules below. Click on each model number to view a photo and see the Details, Specs, Documentation, and Accessories tabs for further information.
Analog Output
- Effective Resolution: 12-bit
- Channels: 4
- Output Type: mA, V
- Output Range: 0 to 20 mA, 4 to 20 mA, ±10 V
- Isolated Voltage: 3000 VDC
- Output Impedance: 0.5 W
- Accuracy: ±0.1 % of FSR for current output ±0.1 % of FSR for voltage output
- Resolution: ±0.015 % of FSR
- Zero Drift Voltage output: ±30 µV/° C current output: ±0.2 µA/° C
- Span Temperature: ±25 ppm/° C Coefficient
- Programmable Output: 0.125 ~ 128 mA/sec. Slope 0.0625 ~ 64.0 V/sec.
- Current Load Resistor: 0 to 500 Ω (source)
Built-in Watchdog Timer
- Isolated Digital Input Channel: 4 level 0: +1 V max level 1: 10 ~ 30 VDC
Built-in Watchdog Timer
- Power Requirement Unregulated +10 ~ +30 VDC
- Power Consumption 3 W @ 24 VDC