| Environmental Product Compliance |
| REACH SVHC |
Lead 7439-92-1 |
| China RoHS |
Environmentally Friendly Use Period = 25; |
| General |
| Net weight |
0.9 kg |
| Efficiency |
> 92.5 % |
| Insulation voltage input/output |
1.5 kV (type test) |
|
1 kV (routine test) |
| Protection class |
III |
| Degree of protection |
IP20 |
| MTBF (IEC 61709, SN 29500) |
|
|
761035,01 h (40 °C) |
| Mounting position |
horizontal DIN rail NS 35, EN 60715 |
| Assembly instructions |
alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm vertically alignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom |
| Standards and Regulations |
| Electromagnetic compatibility |
Conformance with EMC Directive 2014/30/EU |
| Noise immunity |
EN 61000-6-2:2005 |
| Connection in acc. with standard |
CUL |
| Standards/regulations |
EN 61000-4-2 |
| Contact discharge |
4 kV (Test Level 2) |
| Standards/regulations |
EN 61000-4-3 |
| Frequency range |
80 MHz ... 1 GHz |
| Test field strength |
10 V/m |
| Frequency range |
1.4 GHz ... 2 GHz |
| Test field strength |
3 V/m |
| Standards/regulations |
EN 61000-4-4 |
| Comments |
Criterion B |
| Standards/regulations |
EN 61000-6-3 |
|
EN 61000-4-6 |
| Frequency range |
0.15 MHz ... 80 MHz |
| Voltage |
10 V (Test Level 3) |
| Standard - Electrical safety |
EN 60950-1/VDE 0805 (SELV) |
| Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations |
EN 50178/VDE 0160 (PELV) |
| Standard – Safety extra-low voltage |
EN 60950-1 (SELV) |
|
EN 60204 (PELV) |
| Standard - Safe isolation |
DIN VDE 0100-410 |
| Shipbuilding approval |
DNV GL (EMC B) |
| UL approvals |
UL/C-UL listed UL 508 |
|
UL/C-UL Recognized UL 60950-1 |
|
UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous Location) |
| Shock |
18 ms, 30g, in each space direction (according to IEC 60068-2-27) |
| Vibration (operation) |
< 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6) |
|
15 Hz ... 150 Hz, 2.3g, 90 min. |
| Rail applications |
EN 50121-4 |
| Connection data, input |
| Connection method |
Pluggable screw connection |
| Conductor cross section solid min. |
0.2 mm² |
| Conductor cross section solid max. |
2.5 mm² |
| Conductor cross section flexible min. |
0.2 mm² |
| Conductor cross section flexible max. |
2.5 mm² |
| Conductor cross section AWG min. |
24 |
| Conductor cross section AWG max. |
12 |
| Stripping length |
8 mm |
| Screw thread |
M3 |
| Output data |
| Nominal output voltage |
48 V DC ±1 % |
| Setting range of the output voltage (USet) |
30 V DC ... 56 V DC (> 48 V DC, constant capacity restricted) |
| Nominal output current (IN) |
5 A (-25 °C ... 60 °C) |
| POWER BOOST (IBoost) |
6.25 A (-25°C ... 40°C permanent, UOUT = 48 V DC ) |
| Selective Fuse Breaking (ISFB) |
30 A (12 ms) |
| Derating |
60 °C ... 70 °C (2.5%/K) |
| Connection in parallel |
Yes, for redundancy and increased capacity |
| Connection in series |
yes |
| Feedback resistance |
60 V DC |
| Protection against surge voltage on the output |
Yes, limited to < 60 V DC |
| Max. capacitive load |
Unlimited |
| Active current limitation |
Approximately 7 A |
| Control deviation |
< 1 % (change in load, static 10 % ... 90 %) |
|
< 2 % (change in load, dynamic 10 % ... 90 %) |
|
< 0.1 % (change in input voltage ±10 %) |
| Residual ripple |
< 20 mVPP |
| Peak switching voltages nominal load |
< 10 mVPP (20 MHz) |
| Maximum power dissipation in no-load condition |
5.2 W |
| Power loss nominal load max. |
21 W |
| Connection data for signaling |
| Conductor cross section solid min. |
0.2 mm² |
| Conductor cross section solid max. |
2.5 mm² |
| Conductor cross section flexible min. |
0.2 mm² |
| Conductor cross section flexible max. |
2.5 mm² |
| Conductor cross section AWG min. |
24 |
| Conductor cross section AWG max. |
12 |
| Screw thread |
M3 |
| Dimensions |
| Width |
48 mm |
| Height |
130 mm |
| Depth |
125 mm |
| Width with alternative assembly |
122 mm |
| Height with alternative assembly |
130 mm |
| Depth with alternative assembly |
51 mm |
| Weight per piece |
900.0 GRM |
| Input data |
| Nominal input voltage range |
24 V DC |
| Input voltage range |
18 V DC ... 32 V DC |
| Current consumption |
14 A (24 V, IBOOST) |
| Inrush surge current |
< 15 A (typical) |
| Mains buffering |
> 12 ms (24 V DC) |
| Input fuse |
25 A (internal (device protection)) |
| Type of protection |
Transient surge protection |
| Protective circuit/component |
Varistor |
| Connection data, onput |
| Connection method |
Pluggable screw connection |
| Conductor cross section solid min. |
0.2 mm² |
| Conductor cross section solid max. |
2.5 mm² |
| Conductor cross section flexible min. |
0.2 mm² |
| Conductor cross section flexible max. |
2.5 mm² |
| Conductor cross section AWG min. |
24 |
| Conductor cross section AWG max. |
12 |
| Stripping length |
7 mm |
| Screw thread |
M3 |
| Ambient conditions |
| Degree of protection |
IP20 |
| Ambient temperature (operation) |
-25 °C ... 70 °C (> 60 °C derating, 2.5 %/K, startup at -40°C type-tested) |
| Ambient temperature (start-up type tested) |
-40 °C |
| Ambient temperature (storage/transport) |
-40 °C ... 85 °C |
| Max. permissible relative humidity (operation) |
≤ 95 % (at 25 °C, non-condensing) |
| Climatic class |
3K3 (in acc. with EN 60721) |
| Degree of pollution |
2 |
| Approvals |
| |
- ABS
- BV
- RINA
- cUL Recognized
- cUL Listed
- LR
- UL Listed
- IECEE CB Scheme
- cULus Listed
- UL Recognized
- EAC
- NK
- DNV
| Nominal voltage UN |
750 V |
|
|
|
|
| Nominal current IN |
15 A |
|
|
|
|
| mm²/AWG/kcmil |
4 |
|
|
|
|
|
