DA-IRIGB-4DIO-PCI104-EMC4 Hardware Specifications |
• Hardware |
Communication Controller |
FPGA Cyclone V |
Form Factor |
PC-104 |
• Time Code Input |
IRIG-B |
Based on the IRIG STANDARD 200-04 and IEEE 1344 |
• Precision and Accuracy |
Accuracy (Time Synchronization) |
±1 µs |
Accuracy (Free Running) |
±500 ms @ 24 hr |
• Input Signals |
Single Level |
• Open: High
• Short to GND:> Low
• Level Input: 5 to 12 V |
Differential Level |
• D+ - D- > 0.2 V, RXD is High
• D+ - D- < -0.2 V, RXD is Low
• Level Input: 5 V |
• Interface |
IRIG-B |
2-pin wafer to DB9 |
DI/DO |
10-pin wafter to DB9 |
• Protection |
ESD Protection |
8 kV contact, 15 kV Air ESD protection |
Surge Protection |
2 kV line-to-line and 4 kV line-to-ground surge protection, 8/20 µs waveform |
Insulation |
500 V |
• Digital Input |
Input Channels |
3, source type |
Input Voltage |
0 to 30 VDC |
Digital Input Levels for Dry Contacts |
• Logic level 0: Close to GND• Logic level 1: Open |
Digital Input Levels for Wet Contacts |
• Logic level 0: +3 V max.• Logic level 1: +10 V to +30 V (source to DI) |
Isolation |
3 kV optical isolation |
Connector Type |
DB9 male |
• Digital Output |
Output Channels |
4, sink type |
Output Current |
Max. 200 mA per channel |
On-state Voltage |
24 VDC nominal, open collector to 30 V |
Isolation |
3 kV optical isolation |
Connector Type |
Male |
• Operating Systems |
Windows |
Windows 7E |
Linux |
Debian 7 |
• Physical Characteristics |
Dimensions |
90 x 96 mm (3.54 x 3.78 in) |
• Environmental Limits |
Operating Temperature |
-10 to 60°C (14 to 140°F) |
Storage Temperature |
-40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity |
5 to 95% (non-condensing) |
Altitude |
Up to 2000 m |
• Standards and Certifications |
EMC |
CE, FCC |
EMI |
EN 55022, EN 61000-3-2, EN 61000-3-3, FCC Part 15 Subpart B Class A |
EMS |
EN 55024, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11 |
Green Product |
RoHS, CRoHS, WEEE |
|
DA-SP08-DB, DA-SP08-I-DB, DA-SP08-I-TB Hardware Specifications |
• Serial Interface |
Serial Standards |
8 RS-232/422/485 ports, software selectable (DB9 male or terminal block connector) |
ESD Protection |
15 kV for all signals |
Isolation |
2 kV digital isolation (DA-SP08-I-DB and DA-SP08-I-TB only) |
• Serial Communication Parameters |
Data Bits |
5, 6, 7, 8 |
Stop Bits |
1, 1.5, 2 |
Parity |
None, Even, Odd, Space, Mark |
Flow Control |
RTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485 |
Baudrate |
50 bps to 921.6 kbps (supports non-standard baudrates; see user’s manual for details) |
• Serial Signals |
RS-232 |
TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND |
RS-422 |
TxD+, TxD-, RxD+, RxD-, GND |
RS-485-4w |
TxD+, TxD-, RxD+, RxD-, GND |
RS-485-2w |
Data+, Data-, GND |
• Physical Characteristics |
Weight |
290 g |
Dimensions |
130 x 150 x 42 mm (5.12 x 5.91 x 1.65 in) |
MTBF (mean time between failures) |
1,753,143 hrs |
|
DA-SP38-I-TB Hardware Specifications |
• Serial Interface |
Serial Standards |
8 RS-422/485 ports, software selectable (DB9 male or terminal block connector) |
ESD Protection |
15 kV for all signals |
Isolation |
2 kV digital isolation |
• Serial Communication Parameters |
Data Bits |
5, 6, 7, 8 |
Stop Bits |
1, 1.5, 2 |
Parity |
None, Even, Odd, Space, Mark |
Flow Control |
RTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485 |
Baudrate |
50 bps to 921.6 kbps (supports non-standard baudrates; see user’s manual for details) |
• Serial Signals |
RS-422 |
TxD+, TxD-, RxD+, RxD-, GND |
RS-485-4w |
TxD+, TxD-, RxD+, RxD-, GND |
RS-485-2w |
Data+, Data-, GND |
• Physical Characteristics |
Weight |
245 g |
Dimensions |
130 x 150 x 42 mm (5.12 x 5.91 x 1.65 in) |
|
DA-LN04-RJ Hardware Specifications |
• Ethernet Interface |
LAN |
4 auto-sensing 10/100 Mbps ports (RJ45) |
Magnetic Isolation Protection |
1.5 kV built-in |
• Physical Characteristics |
Weight |
198 g |
Dimensions |
132 x 150 x 42 mm (5.20 x 5.91 x 1.65 in) |
|
DA-SW08-RJ Hardware Specifications |
• Ethernet Interface |
LAN |
8 auto-sensing 10/100 Mbps unmanaged Ethernet switch ports (RJ45) |
Magnetic Isolation Protection |
1.5 kV built-in |
• Physical Characteristics |
Weight |
200 g |
Dimensions |
132 x 150 x 42 mm (5.20 x 5.91 x 1.65 in) |
|
DA-UPCI-DK Hardware Specifications |
• Universal PCI Expansion Adatpor |
PCI Slots |
1 |
Interface Bus |
32-bit Universal PCI (3.3 V and 5 V) |
• Physical Characteristics |
Weight |
195 g |
Dimensions |
132 x 150 x 42 mm (5.20 x 5.91 x 1.65 in) |
MTBF (mean time between failures) |
11,053,266 hrs |
|
DA-FX04-MM-ST-T Hardware Specifications |
• Fiber Interface |
Number of Ports |
4 (100BaseFX) |
Fiber Mode |
Multi-mode |
Connector Type |
ST |
Optical Wavelength |
0 to 2 km, 1310 nm (62.5/125 μm, 500 MHz*km) |
Min-TX Output |
-20 dBm |
Max-TX Output |
-14 dBm |
RX Sensitivity |
-34 dBm |
• Physical Characteristics |
Weight |
495 g |
Dimensions |
132 x 150 x 42 mm (5.20 x 5.91 x 1.65 in) |
• Environmental Limits |
Operating Temperature |
-40 to 70°C (-40 to 158°F) |
• Standards and Certifications |
EMC |
EMC Level 4, ESD Level 4, criteria A |
• Software Functions |
IEEE 1588 or IP Teaming Selectable (Default =IP Teaming) |
Supports 4 modes |
AFT |
Adaptor Failover Teaming |
SFT |
Switch Fault Tolerance |
ALB |
Adaptor Failover and Load Balancing |
Link Aggregation |
supported |