|
|
ioLogik 2512-WL1-US-T - Smart Remote I/O with 8 DIs, 8 DIOs, -30 to 70 Degree C by MOXA
|
|
|
- Front-end intelligence with Click&Go Plus control logic, up to 48 rules
- Active communication with MX-AOPC UA Server
- Automatically complement disconnection period data with MX-AOPC UA Logger
software
- 4-port unmanaged switch built in for linking to Ethernet devices
- I/O expansion port for daisy chaining up to 8 ioLogik E1200 units
- 3-in-1 RS-232/422/485 serial port for connecting to serial devices in the field
- Supports SNMPv1/v2c/v3
- Simplify I/O management with MXIO library for Windows or Linux platforms
- Wide operating temperature range of -30 to 70C (-22 to 158F)
|
|
|
The ioLogik 2500 is a smart remote I/O product
with unique hardware and software designs, making it an ideal solution for a
variety of industrial data acquisition applications. The ioLogik 2500’s hardware
design includes a 4-port unmanaged Ethernet switch and 2 serial ports, enabling
the ioLogik 2500 to seamlessly connect to a variety of field devices. One of the
Ethernet ports can be used to link to 8 daisy-chained ioLogik E1200 expansion
modules to provide more than 100 channels. The ioLogik 2500 acts as the “head”
unit, with Click&Go Plus logic used to control the entire I/O array. Most
importantly, the ioLogik 2500’s single IP is all that’s required to connect the
entire I/O array to your network, providing the perfect solution for industrial
field sites that have an insufficient number of IP addresses.
Powerful Control Logic from the New Click&Go Plus™
The new Click&Go Plus™ control logic now supports
up to 48 rules with further upgrades to 8 conditions/actions. In addition, its
graphical user interface provides 3 logic gates and 3 multi-layers, helping you
build more powerful and efficient IO solutions. Once you finish setting up your
Click&Go Plus™ logic rules, IOxpress’s easy-to-use simulation function can be
used to find potential errors in your Click&Go Plus™ rules before uploading them
to your online devices.
Peer-to-peer (P2P) mode is widely used for
industrial applications. Traditionally, you would need to use P2P devices on
both sides of the connection. However, if a configuration mismatch occurred
between the P2P devices, the P2P connection would fail, after which you would
need to spend extra time and effort to check the P2P settings. With IOxpress,
all you need to do is set up the output device, and the P2P connection will be
established automatically.
One IP for Multiple Expansion I/Os Gives You a
Smarter Data Acquisition Solution
The ioLogik 2500’s unique IO expansion hardware
design lets you link up to 8 ioLogik E1200 modules into a versatile I/O array
with 100+ different I/O channels. The ioLogik 2500 acts as the perfect “head”
unit, using Click&Go Plus logic to control the entire I/O array, and providing a
single IP to connect the entire I/O array to your network.
VPN—Build a Reliable and Secure Cellular
Communication Network
For security purposes, the ioLogik 2500-GPRS/HSPA also supports IPSec for
building a secure VPN tunnel to the host station. With the help of VPNs,
cellular devices acting as a VPN client can initiate a connection with a VPN
server. Once the connection is established, cellular devices can communicate
with other network devices on the same private network.
Powerful Datalogger and Value-added MODBUS
Gateway
The ioLogik 2500 supports micro SD cards with up to 32 GB of memory,
turning the ioLogik into a powerful datalogger for storing valuable data. And
with a built-in FTP server, important data from field sites can be accessed
remotely by different systems. In addition, the 2 serial communication ports can
be used to input data from devices using the Modbus RTU protocol, and then
transform the data into Modbus TCP or AOPC tag format before sending it out over
the Ethernet network.
New MX-AOPC UA Server Efficiently Reduces System
Response Time
The new MX-AOPC UA supports
both UA server and DA server types. MX-AOPC UA server has a number of strengths.
UA server provides a standard, state of the art security model, assuring your
system’s security, and supports communication channels via the standard UA TCP
port. This means that messages can be relayed through third party proxies. In
addition, configuring the firewall is be easier, since you won’t need to worry
about DCOM settings.
In addition, MX-AOPC supports both the traditional Modbus protocol and Moxa’s
patented Push type communication. Unlike the traditional passive “pull” method,
“active” messages are automatically “pushed” from the ioLogik 2500 to the SCADA
system when the I/O state changes or pre-configured events occur. In this way,
information can be accurately and efficiently pushed to the SCADA system as it
becomes available.
Available Models
ioLogik 2512-WL1 - Wireless LAN remote I/O with Click&Go Plus, 8 DIs, 8 DI/Os,
-10 to 60°C operating temperature
ioLogik 2512-WL1-T - Wireless LAN remote I/O with Click&Go Plus, 8 DIs, 8 DI/Os,
-30 to 70°C operating temperature
ioLogik 2512-WL1
Specifications |
• Inputs
and Outputs |
Digital Inputs |
8 channels |
Configurable DIOs (by software) |
8 channels |
Isolation |
3k VDC or 2k Vrms |
• Digital
Input |
Sensor Type |
Wet Contact (NPN or PNP) and Dry Contact |
I/O Mode |
DI or Event Counter |
Dry Contact |
• On: short to GND
• Off: open |
Wet Contact (DI to COM) |
• On: 10 to 30 VDC
• Off: 0 to 3 VDC |
Common Type |
8 points per COM |
Counter Frequency |
2.5 kHz |
Digital Filtering Time Interval |
Software configurable |
• Digital
Output |
Type |
Sink |
I/O Mode |
DO or Pulse Output |
Pulse Output Frequency |
5 kHz |
Over-Voltage Protection |
45 VDC |
Over-Current Protection |
1.5 A per channel @ 25°C |
Over-Temperature Shutdown |
175°C (min.) |
Current Rating |
500 mA per channel @ 25°C |
DIO Output Leakage Current |
< 1 mA @ 30 VDC |
• Power
Requirements |
Input Voltage |
9 to 48 VDC |
Input Current |
WL1 Model: 328 mA @ 24 VDC |
• MTBF
(mean time between failures) |
Time |
400,469 hrs |
Standard |
Telcordia SR332 |
• Common
Specifications |
• WLAN |
Standards |
• IEEE 802.11a/b/g for wireless LAN
• IEEE 802.11i for wireless security |
Spread Spectrum and Modulation (typical) |
• DSSS with DBPSK, DQPSK, CCK
• OFDM with BPSK, QPSK, 16QAM, 64QAM
• 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, DBPSK @ 11 Mbps
• 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps, QPSK @ 18/12 Mbps,
BPSK @ 9/6 Mb |
Operating Channels (central frequency) |
• US: 2.412 to 2.462 GHz (11 channels), 5.18 to 5.24 GHz (4 channels)
• EU: 2.412 to 2.472 GHz (13 channels), 5.18 to 5.24 GHz (4 channels) |
Security |
• 64-bit and 128-bit WEP encryption
• Full WPA/WPA2 Personal |
Transmission Rates |
• 802.11b: 1, 2, 5.5, 11 Mbps
• 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
TX Transmit Power |
• 802.11b: Typ. 18±1.5 dBm @ 1 to 11 Mbps
• 802.11g: Typ. 18±1.5 dBm @ 6 to 24 Mbps, Typ. 17±1.5 dBm @ 36 Mbps,
Typ. 16±1.5 dBm @ 48 Mbps, Typ. 16±1.5 dBm @ 54 Mbps
• 802.11a: Typ. 18±1.5 dBm @ 6 to 24 Mbps, Typ. 16±1.5 dBm @ 36 Mbps, Ty |
RX Sensitivity |
• 802.11b: -97 dBm @ 1 Mbps, -94 dBm @ 2 Mbps, -92 dBm @ 5.5 Mbps, -90
dBm @ 11 Mbps
• 802.11g: -88 dBm @ 6 to 24 Mbps, -85 dBm @ 36 Mbps, -75 dBm @ 48 Mbps,
-70 dBm @ 54 Mbps
• 802.11a: -88 dBm @ 6 to 24 Mbps, -85 dBm @ 36 Mbps, -75 dBm @ |
• LAN |
Ethernet |
• 4 switched 10/100 Mbps RJ45 ports
• 1 optimized port for faster downstream communications with
daisy-chained ioLogik E1200 units |
Note |
The optimized daisy-chain
port is not supported by the ioLogik E1261W-T, E1261H-T, or E1263H-T. |
Protection |
1.5 kV magnetic isolation |
Protocols |
Modbus/TCP (slave), TCP/IP, UDP, DHCP, BOOTP, SNMP, HTTP, CGI, SNTP,
SMTP |
• Serial |
Interface |
2 RS-232/422/485 (software selectable) RJ45 ports |
Parity |
None, Odd, Even |
Data Bits |
5, 6, 7, 8 |
Stop Bits |
1, 2 |
Flow Control |
None, RTS/CTS, XON/XOFF |
Baudrate |
300 to 115200 bps |
Protocols |
Modbus/RTU (master/gateway), serial tunnel mode (client/server) |
• Physical
Characteristics |
Wiring |
I/O cable, 14 AWG (max.) |
Dimensions |
61 x 157 x 115 mm (2.4 x 6.18 x 4.53 in) |
Weight |
Under 1265 g (2.79 lb) |
Mounting |
DIN rail (standard), wall (optional) |
• Storage |
Expansion Slot |
Up to 32 GB microSD™ memory card (SDHC compatible) |
Note |
For units operating in
extreme temperatures, industrial-grade, wide-temperature SD cards are
required. |
• Environmental
Limits |
Operating Temperature |
Wide Temp. Models: -30 to 70°C (-22 to 158°F) |
Storage Temperature |
-40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity |
5 to 95% (non-condensing) |
Shock |
IEC 60068-2-27 |
Vibration |
IEC 60068-2-6 |
Altitude |
Up to 2000 m |
Note |
Please contact Moxa if you
require products guaranteed to function properly at higher altitudes. |
• Standards
and Certifications |
Safety |
UL 508 |
EMC |
EN 55022/24, EN 61000-6-2/6-4 |
EMI |
CISPR 22, FCC Part 15B Class A |
EMS |
IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV
IEC 61000-4-5 Surge: Power 2 kV
IEC 61000-4-6 CS: 3 V
IEC 61000-4-8 |
Radio |
R&TTE: EN 62311, EN 300 328, EN 301 489-1, EN 301 489-17, EN 301 893;
NCC; VCCI |
Hazardous Location |
Class 1 Division 2; ATEX Zone 2 |
Green Product |
RoHS, CRoHS, WEEE |
Note |
Please check Moxa’s
website for the most up-to-date certification status. |
• Warranty |
Warranty Period |
5 years |
|
|