|
|
IDS-5042 / 5042+
- Operating Modes : Virtual Com, Serial Tunnel, TCP Server, TCP Client,
UDP
- Redundant multiple host devices :
- 5 host devices : Virtual COM, TCP Server, TCP Client mode
- 4 IP ranges : UDP
- NAT Pass-Through : the user can manage IDS-5012 through NAT router
- Security : SSL data encryption ; secured management by HTTPS and SSHIP
Access
IP White List
- Internet Communication : PPPoE authentication
- Update DNS Hostname : DDNS
- Dual redundant Ethernet port support redundant mode(Recovery time <
10ms)
- Ethernet switch mode enable Daisy Chain
- Event Warning by Syslog, Email, SNMP trap, and Beeper
- Configurable by Web-based and Windows utility (DS-Tool)
- 1KV isolation for PoE P.D. port of IDS-5042+
- Various Windows O.S. supported :
Windows NT/2000/ XP/ 2003/VISTA(32/64bit)/Windows 7(32/64bit)
|
|
|
IDS-5042 series is an innovative secure 4-port RS-232/422/485 to 2 ports LAN
secure device server featuring the standard features of device server, such like
TCP/IP interface and versatile operation modes: Virtual Com, Serial Tunnel, TCP
Server, TCP Client, UDP. In addition, the Windows utility, DS-Tool, could
configure multiple devices and set up the mappings of Virtual Com. The features
of NAT Router Pass-Through, DDNS, and PPPoE make it more convenient for
administrators to configure ORing’s device servers through NAT router from
different IP domains or Internet via modem remotely. On the other hand, IDS-5042
series can simultaneously transfer data up to 5 redundant host PCs to aovid
Ethernet connection breakdown or any host PC fails. Further, IDS-5042 series
features HTTPS, SSH, and SSL encryption to assure the security of critical data
transmission.
IDS-5042 series supports RS-232/422/485 and provides dual redundant power
inputs 12~48 VDC on terminal block to guarantee a non-stop operation. Further,
IDS-5042+ features PoE P.D. (Power Device) function with 1kv isolation on the
PoE port. With wide operating temperature, -10~70°C, and rugged IP- 30 housing
design, IDS-5042 series could operate in the harsh industrial environment.
Therefore, IDS-5042 series is the best solution to the high demand of secure
serial to Ethernet critical data communication.
Physical Ports |
|
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX |
2 |
Serial Ports |
|
Connector |
DB9(male) x 4 |
Operation Mode |
RS-232 / RS-422 / 4(2)-Wire RS-485. Which can be configured by
DS-Tool |
Serial Baud Rate |
110 bps to 460.8 Kbps |
Data Bits |
5, 6, 7, 8 |
Parity |
odd, even, none, mark, space |
Stop Bits |
1, 1.5, 2 |
RS-232 |
TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND |
RS-422 |
Tx+,Tx-, Rx+, Rx-,GND |
RS-485 (4-wire) |
Tx+,Tx-, Rx+, Rx-,GND |
RS-485 (2-wire) |
Data+, Data-,GND |
Flow Control |
XON/XOFF, RTS/CTS, DTR/DSR |
Network Features |
|
Network Protocols |
ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c,
HTTPS, SMTP, SSL, PPPoE, DDNS |
LED Indicators |
|
Power Indicator |
PWR 1(2) / Ready :
Red On : Power is on and booting up
Red Blinking : Indicates an IP conflict, or DHCP or BOOTP server did not
respond properly
Green On : Power is on and functioning Normally
Green Blinking : Located by Administrator |
10/100Base-T(X) RJ45 Port Indicator |
Green for port Link/Act at 100Mbps.
Amber for port Link/Act at 10Mbps. |
Serial TX / RX LEDs |
Red : Serial port is receiving data
Green : Serial port is transmitting data |
Fault Indicator |
Red : Indicate unexpected events occurred |
Fault Contact |
|
Relay |
Relay output to carry capacity of 1A at 24VDC |
Power |
|
Redundant Input Power |
Dual 12~48VDC on 6-pin terminal block |
Power Consumption (Typ.) |
5.5 watts |
Overload Current Protection |
Present |
Reverse Polarity Protection |
Present |
Physical Characteristics |
|
Enclosure |
IP-30 |
Dimensions (W x D x H) |
52(W) x 106.1(D) x 144.3(H) mm (2.05x4.18x5.68 inch.) |
Weight (g) |
678 g |
Environmental |
|
Storage Temperature |
-40 to 85°C (-40 to 185°F) |
Operating Temperature |
-10 to 70°C (14 to 158°F) |
Operating Humidity |
5% to 95% Non-condensing |
Regulatory Approvals |
|
EMI |
FCC Part 15, CISPR (EN55022) class A, |
EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5
(Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
Shock |
IEC60068-2-27 |
Free Fall |
IEC60068-2-32 |
Vibration |
IEC60068-2-6 |
Safety |
EN60950-1 |
MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C ) |
569,972 |
Warranty |
5 years |
|
|