|
|
|
IDS-M311
- Operating Modes: RTU Master, RTU Slave, ASCII Master, ASCII Slave
- Supports up to 16 TCP connections and 32 requests simultaneously
- Convert between Modbus TCP and Modbus RTU/ASCII
- Provides 1xRS-232/422/485 software selectable serial communication
- Internet Communication: PPPoE
- Update DNS Hostname: DDNS
- Event Warning by Syslog, Email, SNMP trap, and Beeper
- Dual DC power inputs
- Configurable by Web Interface
- Various Windows O.S. supported: Windows NT/2000/ XP/ 2003/VISTA(32/64bit)/
Windows 7(32/64bit)
- DIN-rail and Wall mount enabled
|
|
|
IDS-M311 is an innovative 1-port Modbus Gateway which converts between Modbus
TCP and Modbus RTU/ASCII. IDS-M311 is mainly designed for easy integration of
Modbus RTU/ASCII devices and network based Modbus TCP devices without changing
currently existed structure. While IDS-M311 is able to support up to 31 RTU/ASCII
devices in its serial port, thus this model can effectively connect a high
density of Modbus nodes to the same network. In addition, the Web Configuration
Interface could configure multiple devices and set up IDS-M311 operation mode
for different application requirement. IDS-M311 allows user to select from
master or slave mode for user to access Ethernet slave devices or Serial slave
devices.
IDS-M311 supports RS-232/422/485 and provides dual redundant power inputs,
12~48 VDC, on DC power jack and terminal block to guarantee a non-stop
operation. With wide operating temperature, -10~60oC, and rugged IP-30 housing
design, IDS-M311 could operate in the harsh industrial environment. Therefore,
IDS-M311 is the best solution to the high demand of secure serial to Ethernet
critical data communication.
| Physical Ports |
|
| 10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX |
1 |
| Serial Ports |
|
| Connector |
DB9(male) x 1 |
| Operation Mode |
RS232 / RS422 / 4(2)-Wire RS485. Which can be configured by Web
interface |
| Serial Baud Rate |
110bps to 460.8kbps |
| Data Bit |
5, 6, 7, 8 |
| Stop Bit |
1, 1.5, 2 |
| Parity |
odd, even, none, mark, space |
| RS-232 |
TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND |
| RS-422 |
Tx+,Tx-, Rx+, Rx-,GND |
| RS-485(4-Wire) |
Tx+,Tx-, Rx+, Rx-,GND |
| RS-482(2-wire) |
Data+, Data-,GND |
| Flow Control |
XON/XOFF, RTS/CTS, DTR/DSR |
| Network Features |
|
| Network Protocols |
ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP,
PPPoE, DDNS |
| LED Indicators |
|
| Power Indicator |
PWR 1(2) / Ready:
Red On : Power is on and booting up.
Red Blinking : Indicates an IP conflict, or DHCP or BOOTP server did not
respond properly.
Green On : Power is on and functioning Normally.
Green Blinking : Located by Administrator. |
| 10/100Base-T(X) RJ45 Port Indicator |
Green for port Link/Act at 100Mbps. Amber for port Link/Act at
10Mbps. |
| Serial TX / RX LEDs |
Red : Serial port is receiving data
Green : Serial port is transmitting data |
| Power |
|
| Redundant Input Power |
Dual DC inputs. 12-48VDC on 3-pin terminal block and power jack |
| Power Consumption (Typ.) |
4 watts |
| Overload Current Protection |
Present |
| Reverse Polarity Protection |
Present on terminal block |
| Physical Characteristics |
|
| Enclosure |
IP-30 |
| Dimensions (W x D x H) |
72(W)x29.4(D)x123.4(H) mm (2.83x1.16x4.86 inch.) |
| Weight (g) |
294 g |
| Environmental |
|
| Storage Temperature |
-40 to 85°C (-40 to 185°F) |
| Operating Temperature |
-10 to 60°C (14 to 140°F) |
| Operating Humidity |
5% to 95% Non-condensin |
| Regulatory Approvals |
|
| EMI |
FCC Part 15, CISPR (EN55022) class A, |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5
(Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock |
IEC60068-2-27 |
| Free Fall |
IEC60068-2-32 |
| Vibration |
IEC60068-2-6 |
| Safety |
EN60950-1 |
| Warranty |
5 years |
|
|
