|
|
ET-7083 - 3 Axis, 32 bit Encoder Counter by ICP DAS
|
|
|
Modbus TCP based Remote Ethernet I/O Data Acquisition Module with 3-axis Encoder/Counter Inputs (Digital Input). Support Modbus TCP and Modbus UDP Protocols. 32-bit Counter. Support Operating Temperatures: -25 ~ + 75°C (-13°F ~ +167°F) and has a din rail mount.
|
|
|
The ET-7083/PET-7083/ET-7283/PET-7283 is a 3-axis high speed encoder/counter module. Its each axis can be individually configured for Quadrant, Pulse/Direction or CW/CCW counting modes. The maximum input rate for Quadrant counting mode is 1 MHz, and for Pulse/Direction, CW/CCW counting modes is 4 MHz. The encoder/counter module is equipped a FRAM to retain the counter value after it is powered off. FRAM is a nonvolatile memory that can hold written data even after it is powered off. The data retention can be 10 years. And the feature can be configured as enabled or disabled.
- Built-in Web Server
- Web HMI
- Support for both Modbus TCP and Modbus UDP Protocol
- Communication Security
- 2-port Ethernet Switch for Daisy-Chain Topology
- Dual Watchdog
- Wide Operating Temperature Range: -25 ~ + 75°C
- Built-in I/O
- 3-Axis 32-bit encoder/counter iinputs
- 1 Mhz max. for Quadrant mode
- 1 Mhz max. for CW/CWW, Pulse/Direction mode
- Count Value Retention for 10 years
Software |
Built-In Web Server |
Yes |
Web HMI |
Yes |
I/O Pair Connection |
Yes |
Communication
|
Ethernet Port |
1 x RJ-45, 10/100 Base-TX |
PoE |
- |
Protocol |
Modbus/TCP, Modbus/UDP |
Security |
ID, Password and IP Filter |
Dual Watch Dog |
Yes, Module (0.8 second), Communication (Programmable) |
LED Indicators |
for System Running |
Yes |
For Ethernet Link/Act |
Yes |
for DI/DO |
- |
for PoE Power |
- |
2-Way Isolation |
Ethernet |
1500 VDC |
I/O |
2500 VDC |
EMS Protection
|
ESD (IEC 61000-4-2) |
4 kV Contact for Each Terminal and 8 kV Air for Random Point |
EFT (IEC 61000-4-4) |
+/-4 kV for Power |
Power Requirements
|
Reverse Polarity Protection |
Yes |
Powered from Terminal Block |
1 ~ 30 VDC |
Power PoE |
- |
Consumption |
2.7W |
Mechancial |
Dimensions |
72 mm x 123 mm x 35 mm |
Installation |
DIN-Rail or Wall mounting |
Environmental
|
Operating Temperature |
-25 ~ +75°C |
Storage Temperature |
-30 ~ +80°C |
Humidity |
10 ~ 90% RH, Non-condensing |
Environmental |
Operating Temperature |
-25 ℃ ~ +55 ℃ |
Storage Temperature |
-40 ℃ ~ +80 ℃ |
Ambient Relative Humidity |
5 ~ 95% RH, non-condensing |
I/O Specification
Software |
Axis |
3 |
Counting Mode |
Quadrant |
CW/CCW |
Pulse/Direction |
Maximum Count |
32-bit |
Maximum Counting Rate |
Quadrant mode: 1 Mhz |
CW/CCW mode: 4Mhz |
Pulse/Direction mode: 4Mhz |
Count Value Retention |
Yes, for 10 years |
Counter Preset Value |
Programmable |
Input Signal Level |
5 VDC |
12 VDC with 1k ohm external resistor (1/2 W) |
24 VDC with 2k ohm external resistor (1/2 W) |
Intra-module Isolation, Field to Logic |
2500 Vrms |
|
|