|
|
|
A-8111 - 12 Bit Multifunction Board with 30KS/s sampling rate, 8 Channel Analog Input, 1 Channel Analog Output, 16 Digital Input
by ICP DAS
|
|
|
|
30KS/s 12-bit Analog and Digital I/O Board. Includes one CA-4002 D-Sub connector.
|
|
|
A-8111 is a 12-bit multifunction, analog and digital I/O board for PC/AT compatible computers. A-8111 offers 8-channels of analog inputs, plus one channel of analog output with 12-bit resolution. A-8111 has 16 digital inputs and 16 digital outputs. A-8111 provides gains of 1, 2, 4, 8, and 16. It has a maximum sampling rate of 30K samples/s.
- 12-bit A/D converter
- 12-bit D/A converter
- 8 single-ended or 8 differential input channels
- 30 k/s sampling rate
- One 12-bit analog output channel
- Analog Output Range : 0~5V , 0~10V
- Software programmable gain :1, 2, 4, 8, 16
- Interrupt handling
- A/D Trigger modes : Software Trigger, Pacer Trigger, External Trigger , Event Trigger
- A/D data transfer modes : polling , interrupt , DMA
- 16 digital input & 16 digital output
- 37 pin D-Sub connector
- Software:
- Toolkit for DOS
- Toolkit for Windows 95/98
- Toolkit for Windows NT
- Toolkit for Windows 2000/XP
- Toolkit for Labview 95/98
- Toolkit for Labview NT
- Toolkit for Labview 2000/XP
- ActiveX Control (OCX) 95/98
- ActiveX Control (OCX) NT
- ActiveX Control (OCX) 2000/XP
- Toolkit for LINUX
- Toolkit for DasyLab
- Applications:
- Signal analysis
- Industrial automation
- Laboratory automation
- Sensor interface
- FFT & frequency analysis
- Transient analysis
- Production tests
- Process control
| Analog Input |
| Channels |
8 single-ended |
| A/D Converter |
12-bit, 8 μs conversion time |
| Sampling Rate |
35 kS/s. max. |
| Over voltage Protection |
Continuous +/-35 Vp-p |
| Input Impedance |
10 MΩ/6 pf |
| Trigger Modes |
Software, Pacer |
| Data Transfer |
Polling, Interrupt |
| Accuracy |
0.01 % of FSR ±1 LSB @ 25 °C, ± 10 V |
| Zero Drift |
15 ppm/°C of FSR |
| Analog Output |
| Channels |
1 independent |
| Resolution |
12-bit |
| Accuracy |
0.01% of FSR ± 1 LSB @ 25 °C, ± 10 V |
| Output Range |
Unipolar: 0 ~ 5 V, 0 ~10 V
Bipolar: +/-10 V |
| Output Driving |
+/- 5 mA |
| Slew Rate |
0.6 V/μs |
| Output Impedance |
0.1 Ω max. |
| Operating Mode |
Software |
| Digital Input |
| Channels |
16 |
| Compatibility |
5 V/TTL |
| Input Voltage |
Logic 0: 0.8 V max.
Logic 1: 2.0 V min. |
| Response Speed |
1.0 MHz (Typical) |
| Digital Output |
| Channels |
16 |
| Compatibility |
5 V/TTL |
| Output Voltage |
Logic 0: 0.4 V max.
Logic 1: 2.4 V min. |
| Output Capability |
Sink: 0.8 mA @ 0.8 V
Source: -2.4 mA @ 2.0 V |
| Response Speed |
1.0 MHz (Typical) |
| Timer/Counter |
| Channels |
3 independent |
| Resolution |
16-bit |
| Compatibility |
5 V/TTL |
| Input Frequency |
10 MHz max. |
| Reference Clock |
Internal: 2 MHz |
| General |
| Bus Type |
ISA |
| I/O Connector |
Female DB37 x 1
20-pin box header x 2 |
| Dimensions (L x W x D) |
157 mm x 106 mm x 22 mm |
| Power Consumption |
300 mA @ +5 V
60 mA @ +12 V
30 mA @ -12 V |
| Operating Temperature |
0 ~ 60 °C |
| Storage Temperature |
-20 ~ 70 °C |
| Humidity |
5 ~ 85% RH, non-condensing |
| Analog Input Range |
| Model |
A-8111 |
| Gain |
1 |
2 |
4 |
8 |
16 |
| Bipolar (V) |
+/- 5 |
+/- 2.5 |
+/- 1.25 |
+/- 0.625 |
+/- 0.3125 |
| Sampling Rate Max. |
125 kS/s |
125 kS/s |
125 kS/s |
125 kS/s |
35 kS/s |
|
|
