|
|
|
EDR-810-2GSFP-T - Industrial Secure Router Switch with 8 10/100BaseT(X) ports, 2 1000Base Gigabit SFP slots, 1 WAN, Firewall/NAT
by MOXA
|
|
|
|
- 8+2G all-in-one Firewall/NAT/Router/Switch
- Protect critical assets by stateful firewall
- Inspect industrial protocol with PacketGuard technology
- Setup network easily by network address translation (NAT)
- RSTP/Turbo Ring redundant protocol enhances network redundancy
- -40 to 75°C operating temperature range
- ISA99 / IEC 62443 / NERC CIP compliance
- Check firewall settings with intelligent SettingCheck feature
|
|
|
Introduction
The EDR-810-2GSFP-T is a highly integrated industrial multiport secure router with Firewall/NAT/VPN and managed Layer 2 switch functions. It is designed for Ethernet security applications in sensitive remote control or monitoring networks, and provides an electronic security perimeter for the protection of critical cyber assets such as pumping/treatment systems in water stations, DCS systems in oil and gas applications, and PLC/SCADA systems in factory automation. The EDR-810-2GSFP-T includes the following cyber security features:
- Firewall/NAT: Firewall policies control network traffic between different trust zones, and Network Address Translation (NAT) shields the internal LAN from unauthorized activity from outside hosts.
The EDR-810-2GSFP-T’s “WAN Routing Quick Setting” provides an easy way for users to set up WAN and LAN ports to create a routing function in 4 steps. In addition, the EDR-810-2GSFP-T’s “Quick Automation Profile” gives engineers a simple way to configure the firewall filtering function with general automation protocols, including EtherNet/IP, Modbus TCP, EtherCAT, FOUNDATION Fieldbus, and PROFINET. Users can easily create a secure Ethernet network from a user-friendly web UI with a single click, and the EDR-810-2GSFP-T is capable of performing deep Modbus TCP packet inspection. Standard temperature model (EDR-810-2GSFP) operates at -10 to 60°C environment is also available.
| • Technology |
| Standards |
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseX
IEEE 802.1Q for VLAN tagging
IEEE 802.3ad for port trunk |
| Protocols |
SNMP v1/v2c/v3, DHCP server/client, TFTP, NTP/SNTP server/client, HTTP, HTTPS, Telnet, SSH, IPSec, L2TP, IGMP v1/v2/v3, QoS/CoS/ToS, Radius, RSTP/STP, LLDP, DDNS, Proxy ARP |
| Routing |
Static routing, RIP V1/V2, OSPF |
| Routing Redundancy |
VRRP |
| Multicast Routing |
Static, DVMRP, PIM-SM/SSM |
| Broadcast |
IP directed broadcast, broadcast forwarding |
| Redundancy |
STP/RSTP, Turbo Ring V2 |
| Flow Control |
IEEE 802.3x flow control, back pressure flow control |
| • Interface |
| RJ45 Ports |
10/100BaseT(X) auto negotiation speed |
| Fiber Ports |
1000BaseSFP slot |
| Console Port |
Web/telnet/SSH/CLI, and RS-232 serial console |
| RESET button |
Reset to default settings |
| LED Indicators |
STATE, PWR1, PWR2, FAULT, 10/100/1000M |
| Alarm Contact |
One relay output with current carrying capacity of 1 A @ 24 VDC |
| Digital Inputs |
1 2-contact terminal block• +13 to +30 V for state “1”
• -30 to +3 V for state “0”
• Max. input current: 8 mA |
| • Security Functions |
| Firewall |
• Stateful inspection
• Router firewall and transparent (bridge) firewall
• Filter: IP and MAC address, ports, ICMP, DDoS, Ethernet Protocols
• Deep Packet Inspection on Modbus TCP |
| Quick Automation Profile |
EtherCAT, EtherNet/IP, FOUNDATION Fieldbus, LonWorks, Modbus/TCP, PROFINET, IEC 60870-104, DNP, FTP, SSH, Telnet, HTTP, IPSec, L2TP, PPTP, RADIUS |
| NAT |
N-to-1, 1-to-1, bidirectional 1-to-1, and port forwarding |
| VPN |
IPSec (client/server), L2TP (server), PPTP (client), Max. 10 VPN tunnels (VPN model) |
| Real-Time Firewall / VPN Event Log |
Local storage, syslog, and SNMP trap |
| Encryption |
DES, 3DES, AES-128/192/256 (VPN model) |
| Authentication |
Pre-shared key (PSK), X.509v3 certificates, MD5, SHA |
| Data Throughput |
100 Mbps (10000 fps) |
| VPN Throughput |
17 Mbps (AES-256, SHA-256) |
| • Switch Properties |
| Max. Number of VLANs |
16 |
| VLAN ID Range |
1 to 4094 |
| IGMP Groups |
256 |
| • Power Requirements |
| Input Voltage |
12/24/48 VDC (9.6 to 60 VDC), redundant dual inputs |
| Input Current |
0.37 A @ 24 V |
| Overload Current Protection |
Present |
| Connection |
Removable terminal block |
| Reverse Polarity Protection |
Present |
| • Physical Characteristics |
| Housing |
Metal |
| Dimensions |
53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in) |
| Weight |
830 g |
| Installation |
DIN-rail mounting, wall mounting (with optional kit) |
| • Environmental Limits |
| Operating Temperature |
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature |
-40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity |
5 to 95% (non-condensing) |
| • Standards and Certifications |
| Safety |
UL 508 |
| Hazardous Location |
UL/cUL Class I Division 2 Groups A/B/C/D |
| EMI |
FCC Part 15 Subpart B Class A, EN 55022 Class A |
| EMS |
EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3,
EN 61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3,
EN 61000-4-6 (CS) Level 3 |
| Rail Traffic |
EN 50121-4 |
| Transportation |
NEMA TS2 |
| Shock |
IEC 60068-2-27 |
| Freefall |
IEC 60068-2-32 |
| Vibration |
IEC 60068-2-6 |
| Note |
Please check Moxa’s website for the most up-to-date certification status. |
| • MTBF (mean time between failures) |
| Time |
981,954 hrs |
| Database |
Telcordia (Bellcore), GB |
|
|
