TP-ESP-1000-POE24 - Network Lightning/Surge Protector

46V Clamp Voltage, 5KA Surge. For up to
by Tycon Systems

10/100/1000Mb Data Rate (24 or 48V POE Model)
CAT5/6 Compatible. All 8 pins protected.
Shielded jacks and full metal housing
Complies with IEC 61643-21 Standard
UL497B Listed

Description
Specification
Datasheet

The TP-ESP-1000-POE24 are a low cost Ethernet surge protector to help protect sensitive equipment from surges caused by lightning and grid power fluctuations. They have a full metal body for improved EMI suppression and have integral mounting feet and separate ground wire. They are designed for indoor or outdoor use inside a weatherproof enclosure. The ESP-1000-POE is compatible with 10/100/1000M PoE systems up to 57V. The ESP-1000-POE24 is compatible with 10/100/1000M PoE systems up to 30V. The ESP-100-POE24 is for 10/100M passive PoE systems up to 30V. Protection is provided on all 8 CAT5/6 wires.

Operating Voltage	Data 5V ; PoE 24V
Clamping Voltage	40V POE (All 8 Pins)
Max Surge Discharge Current	5KA (8/20us)
Peak Pulse Current	100A (10/1000us)
Protection Mode	Differential & Common Mode
Insulation Resistance	>1000 MOhm
Shunt Capacitance	< 50 pF
Data Rate	10/100/1000 Mbps
Response Time	<5 ns
Operating Temperature	-40 to +85°C
Storage Temperature	-40 to +125°C
Operating Humidity	0% to 95% non condensing
Size (L x W x H)	4 x 1 x 1" (102 x 25 x 25mm)
Weight	3.1oz (88g)
Ground Wire	14 AWG, 10" (26cm) long
Connectors	RJ45 Shielded Jacks
IEC Standard	61000-4-5, 61643-21
UL Standard	na
IEEE/ ANSI Standard	C62.45
MTBF (Mean Time Between Failure)	819,049 Hours