Need assistance or guidance?

Contact us @: 1-800-301-9097 		Login / Register Contact Us
CART
SHOP BY CATEGORY
SHOP BY BRAND

                         

 
Home Ethernet Switches Ethernet Accessories Adapters
27030108 - INJ 1110-T DIN Rail PoE Injector with electrical isolation: 60 W Type 3 Hi-PoE compliant, two RJ45 sockets, 10/100/10 by PERLE

27030108 - INJ 1110-T DIN Rail PoE Injector with electrical isolation: 60 W Type 3 Hi-PoE compliant, two RJ45 sockets, 10/100/10
by PERLE
Write a review Write a review
  • 10/100/1000 Mbps
  • Supply PSE power to PoE, PoE+ and Hi-PoE compliant devices
  • Provide 4 to 60 Watts of PoE power
  • IEEE 802.3af, IEEE802.3at and IEEE802.3bt compliant
  • Support for PoE PDs: Class 1 to 6 & Type 1, 2 and 3
  • Extended supply voltage range of 18 V DC ... 57 V DC, redundant
  • Safe shield connection to ground potential
  • Optional Extended temperature range of -40°C to +75°C
  • Electrical isolation of the internal power supply unit

 

Mfg SKU # : 27030108
List Price : $737.00
Our Price : $627.00
Stock : 3
Quantity :

INJ 1100-T PoE Injectors are DIN Rail mounted single port, PoE mid-span injectors. They act as an intermediary devices between a non-PoE switch and a PoE device to inject fully compliant power over the Ethernet cable. With electrical isolation of the internal power supply, the INJ-1100-T units are also protected against short circuits on the PoE side.

Generating up to 60 Watts, the INJ 1100-T provides electrical power to remote PD access points, pan-tilt and zoom (PTZ) cameras and video-phones. It complies with the IEEE802.3bt Hi-PoE (60W of power) or IEEE 802.3at PoE+ (30W of power) standards and is also backward compatible with IEEE802.3af PoE (15.4W of power). Learn more about PoE.

With the INJ 1100-T, there is no need to buy an expensive PoE switch or install electrical wiring and outlets in hard to reach locations. Just use and open port on an existing non-PoE switch to save time and money by sending power and data over the same cable.

INJ 1000 PoE Injector Benefits

DIN Rail Enclosure

Easily mount on a DIN rail or inside distribution boxes using native DIN Rail enclosure with grounding clip. No need for add-on brackets.

Power Over Ethernet (PSE)

Performs the Power Sourcing Equipment ( PSE ) function on 1 UTP port for IEEE 802.3af (up to 15.4 watts PoE), IEEE 802.3at ( up to 30 watts PoE+ ) or IEEE802.3bt (up to 60 watts Hi-PoE) compliant devices.

Electrical isolation of the internal power supply unit

The supply voltage and Power over Ethernet port are electrically isolated. This provides optimum protection against short circuits in the data cables on the field side. The passive network isolator protects Ethernet devices from potential differences of up to 4 kV.


Short-circuit protection via electrical isolation

Potential Separation

Safe shield connection to ground potential

On-board PoE Power Controller

This PoE power controller provides compliant power provisioning and monitoring, properly sensing through signature detection whether or not the attach Ethernet devices are PoE capable or not. This provides a safe connection for both PoE and Non-PoE capable devices. Click here for more details

Advanced Power Management
  • PD signature detection
  • Current limiting protection
  • Over-Current Protection
  • PD power classification detection ( Class 0,1,2,3,4,5,6 )
  • Reverse polarity protection
Serial interface
Interface 1 Ethernet
Connection method RJ45 socket
Transmission length 100 m (including patch cables)
Pin assignment 1:1
Basic functions PSE/Midspan, compliant with IEEE 802.3af, at
Serial transmission speed 10/100/1000 Mbps
Output nominal voltage 54 V DC (PoE)
Output power 60 W
Maximum output power 75 W
Interface 2 Ethernet
Connection method RJ45 CAT5e
Ambient conditions
Ambient temperature (storage/transport) -40°C ... 85°C
Permissible humidity (operation) 10 % ... 95 % (non-condensing)
General
Electrical isolation VCC // FE // PoE
Test voltage data interface/power supply 1.5 kV AC (50 Hz, 1 min.)
Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
Mounting position vertical
Net weight 324.72 g
Housing material Plastic
Color Gray
MTTF
(SN 29500 standard, temperature 25 °C, operating cycle 21 % (5 days a week, 8 hours a day))		 3062 Years
MTTF
(SN 29500 standard, temperature 40 °C, operating cycle 34.25 % (5 days a week, 12 hours a day))		 1397 Years
MTTF
(SN 29500 standard, temperature 40 °C, operating cycle 100 % (7 days a week, 24 hours a day))		 558 Years
Conformance CE-compliant
UL, USA UL 60079-0 Ed. 6 / UL 60079-15 Ed. 4
UL, USA/Canada Class I, Zone 2, AEx nA IIC T4, Ex nA IIC Gc X T4
Class I, Division 2, Groups A, B, C, D
UL, Canada CSA 22.2 No. 60079-0 Ed. 3 / CSA 22.2 No. 60079-15:16
Standards and Regulations
Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
Type of test Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6
Test result 10 Hz ... 57 Hz, amplitude ±3.5 mm, 57 Hz ... 150 Hz, 5g
Type of test Shock in acc. with EN 60068-2-27/IEC 60068-2-27
Test result 30g for 11 ms, three shocks in each spatial direction
Type of test Continuous shock according to EN 60068-2-27/IEC 60068-2-27
Test result 10g for 16 ms, 1000 shocks in each spatial direction
Standards/regulations EN 61000-4-2
Contact discharge ± 6 kV (Test Level 3)
Indirect discharge  
Standards/regulations EN 61000-4-3
Frequency range 80 MHz ... 3 GHz (Test Level 3)
Standards/regulations EN 61000-4-4
Comments Criterion B
Standards/regulations EN 61000-4-5
Signal ± 1 kV (Data line, asymmetrical)
± 2 kV (I/O cable on field side only, asymmetric)
Standards/regulations EN 61000-6-4
EN 61000-4-6
Frequency range 0.15 MHz ... 80 MHz
Conformance CE-compliant
UL, USA UL 60079-0 Ed. 6 / UL 60079-15 Ed. 4
UL, USA/Canada Class I, Zone 2, AEx nA IIC T4, Ex nA IIC Gc X T4
Class I, Division 2, Groups A, B, C, D
UL, Canada CSA 22.2 No. 60079-0 Ed. 3 / CSA 22.2 No. 60079-15:16
Noxious gas test ISA-S71.04-1985 G3 Harsh Group A
Dimensions
Width 30.2 mm
Height 130 mm
Depth 120 mm
Note
Utilization restriction 1
Power supply
Nominal supply voltage 24 V DC
48 V DC
Supply voltage range 18 V DC ... 57 V DC
Max. current consumption 4.2 A
2.73 A (24 V DC)
1.34 A (48 V DC)
Power consumption ≤ 75 W
Protective circuit Reverse polarity protection
Conductor cross section flexible max. 4.00 mm²
Conductor cross section flexible min. 0.75 mm²
Conductor cross section solid max. 4.00 mm²
Conductor cross section solid min. 0.75 mm²
Conductor cross section AWG max. 12
Conductor cross section AWG min. 20
Environmental Product Compliance
REACH SVHC Lead 7439-92-1
China RoHS Environmentally friendly use period: unlimited = EFUP-e
QUICK LINKS
COMPANY INFO
Payment Types & Security
Copyright © 2024 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.