Need assistance or guidance?

Contact us @: 1-800-301-9097
Login / Register Contact Us
 
TGPS-1080-M12-24V - EN50155 IP40  8x 10/100/1000TX (PoE) with M12 connector unmanaged switch 24VDC by ORing Industrial Networking

TGPS-1080-M12-24V - EN50155 IP40 8x 10/100/1000TX (PoE) with M12 connector unmanaged switch 24VDC
by ORing Industrial Networking

Write a review Write a review
TGPS-1080-M12-24V_SUMMARY
  • Leading EN50155-compliant Ethernet switch for rolling stock application
  • Provide 8x10/100/1000Base-T(X) PoE (P.S.E.) ports
  • Supports IEEE 802.3at compliant PoE and total power budget is 120Watts with maximum 30Watts per port
  • Support dual power inputs for power redundancy
  • Support auto-negotiation and auto-MDI/MDI-X
  • Support store and forward transmission
  • Support flow control
  • M12 connectors to guarantee reliable operation against environmental disturbances
  • Rigid IP-40 housing design
  • Wall mounting enabled
ORing’s TransporterTM series un-managed Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications.  The TGPS-1080-M12-24V is an un-managed PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. which is specifically designed for the toughest and fully compliant with EN50155 requirement.  TGPS-1080-M12-24V also supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network.  Each TGPS-1080-M12-24V switch has 8X10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports.  P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup.  TGPS-1080-M12-24V EN50155 Ethernet switch use M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock.  In addition, the wide operating temperature range from -40 oC to 70oC can satisfy most of operating environment.  Therefore, the switch is one of the most reliable choices for rolling stock and highly-managed PoE Ethernet application.
Physical Ports  
 10/100/1000Base-T(X) Ports in M12With P.S.E. 8 x M12 connector (8-pin A-coding)
Technology  

Ethernet Standards

IEEE 802.3 for 10Base-T

IEEE 802.3u for 100Base-TX

IEEE 802.3ab for 1000Base-T

IEEE 802.3x for Flow control

IEEE 802.3at compliant PoE specification (total power budget is 120Watts with maximum 30Watts per port)

MAC Table 8K MAC addresses

Processing

Store-and-Forward

LED Indicators  
Power Indicator Green : Power LED x 3
Fault indicator

Amber : Indicate PWR1 or PWR2 failure

10/100/1000Base-T(X) RJ45 port indicator and PoE indicator

Top Green for port Link/Act indicator

Middle Amber for Duplex / Collision indicator

Bottom Blue for PoE Injected indicator
Fault Contact  
Relay Relay output to carry capacity of 3A at 24VDC on M12 connector (5-pin A-coding)
Power  
Redundant Input power

Dual DC inputs. 24VDC (12 ~ 57VDC) on 5-pin M23 connector

Power Consumption (Typ.) 11 Watts (power consumption of P.S.E. is not included)
PoE Output Power 60 Watts (12~24VDC) / 120 Watts (24~57VDC)
Overload Current Protection Present
Reverse Polarity Protection NOT Present
Physical Characteristic  
Enclosure IP-40
Dimension (W x D x H)

125 (W) x 65 (D) x 196 (H) mm

Weight (g)

988 g

Environmental  
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory approvals  
EMI FCC FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4)
EMS

EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11

Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1

Copyright © 2024 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.