The Data Connect 2178 High Power Wireless Ethernet Extender provides higher transmitting power that translates to better performance and less interference with your wireless network when setting up wireless Ethernet extension. The Data Connect HPWEE is compatible with IEEE 802.11a/n, and the data rate is up to 300Mbps with the 802.11n mode. The Data Connect HPWEE not only has built-in 16dBi dual-polarity Antenna plus two External Antenna Connectors to allow stronger antenna upgrades. Therefore, the Data Connect HPWEE is quite suitable for widely open space wireless applications.
The Data Connect 2178HP-WEE Supports multiple operation modes: AP, AP Client, and WDS to conveniently configure versatile solutions in a wide range of wireless scenarios. It also supports WISP mode so that CPE users could easily connect to internet via a WISP provider to connect to a wired network.
In aspect of security, besides 64/128/152 bits WEP encryption, the Data Connect 2178HP-WEE integrates WPA / WAP2, WPA-PSK / WPA2-PSK and 802.1x authority, to secure and protect your wireless Ethernet extender. Furthermore, with user-friendly Web and SNMP based management interface, the Data Connect 2178HP-WEE is easily managed and can be configured remotely.
The Data Connect 2178HP-WEE is perfectly suitable to be installed in outdoor environments and exposed locations. With its IP-55 casing protection, the Data Connect 2178HP-WEE can perform normally under rigorous weather conditions including heavy rain and wind. With our unique Power over Ethernet (PoE) design, the Data Connect 2178HP-WEE can be easily installed in the areas where power outlets are not available. The best way of using the Data Connect 2178HP-WEE, is to build outdoor wireless Ethernet extension between buildings on campuses, business parks, rural areas and across highway for example.
Application
Higher coverage & long distance between LAN connections The Data Connect 2178HP-WEE is a cost-effective outdoor wireless Ethernet extension solution for open space applications. It is best applied in outdoor wireless Ethernet extension connections between buildings.
With multiple antenna choice and adjustable output power controller, the Data Connect 2178HP-WEE provides higher coverage and long distance wireless Ethernet extension also allows CPE users to easily install and adjust the suitable value in appropriate locations. The WISP mode supported also enables CPE users to connect to internet via local WISP provider.
*** We suggest matching the same model in outdoor wireless Ethernet extension application for getting best performance
Standard Support IEEE 802.11a/n IEEE 802.3u
Interface Wireless IEEE 802.11a/n LAN: 2 x10/100Base-TX, Auto-MDI/MDI-X
Modulation OFDM with BPSK, QPSK, 16-QAM
Antenna Internal (default): 16dBi dual-polarity *Vertical Port HPBW (YZ Plane /H-Plane): 36° (XZ Plane /E-Plane): 15° *Horizontal Port HPBW (YZ Plane / E-Plane): 38° (XZ Plane / H-Pane): 17° External: RP-SMA Connector x2 *internal & external antenna switchable by Software
Receiver Sensitivity
- IEEE 802.11a: -89 dBm @ 6Mbps -88 dBm @ 9Mbps -87 dBm @ 12Mbps -86 dBm @ 18Mbps -83 dBm @ 24Mbps -79 dBm @ 36Mbps -75 dBm @ 48Mbps -73 dBm @ 54Mbps
- IEEE 802.11n: HT20 MCS0~MCS7 ≤ -89dBm HT40 MCS0~MCS7 ≤ -85dBm HT20 MCS8~MCS15 ≤ -83dBm HT40 MCS8~MCS15 ≤ -80dBm
Max. Output Power 802.11a: 24± 2dBm 802.11n: 23± 2dBm (HT20/40) 5 levels adjustable (Full, 50%, 25%, 12.5%, Min)
Data Rate 802.11a: 54/48/36/24/18/12/9/6Mbps 802.11n: HT20/40 MCS0~15 (6.5Mbps to 300Mbps)
Frequency Range FCC: 5725~5850MHz CE: 5470~5725MHz (DFS band)
Wireless Security 64/128/152-bits WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, & 802.1X
Wireless Access Mode AP, Client, Client CPE (WISP), WDS, & AP+WDS
Environmental Protection Rating IP-55
Dimensions (W x D x H) 110.98 x 255.6 x 47.65mm
Power Adapter 15V DC, 0.8A (passive POE)
Operating Environment Temperature: -20 ~ 70°C Humidity: 10~95% non-condensing